Haier GE GFW510SCN0 Technical Service Manual page 35

Step 4: Remove, Reverse And Replace Door
Striker
• Remove the two screws from the striker
assembly and remove the assembly by pulling
it toward the center, pushing it up and pulling
it out.
• Rotate the striker assembly and replace it on
the opposite side with its screws.
Step 5: Replace The Door Himge And The
Cover On The Opposite Side
• Rotate the door hinge and replace it on the
oppositeside with its screws.
• Rotate the door hinge cover and replace it on
the opposite side with its screws.
Hinge Cover
Hinge
Step 6: Remove The Terminal Holder And
Disconnect The Pin Connector From The
Washer
• Using your
fingers, pry
the terminal
holder from
the washer
face.
• Disconnect
the pin
connector.
– 35 –