Advertisement
Step 10
For queen size beds, fasten your bed frame to the LEGS (E and F). Use four GOLD 2-3/4" FLAT HEAD BOLTS (109S)
å
through your bedframe and LEGS. Use four WASHERS (13M) and tighten four NUTS (24M) onto the ends of the BOLTS.
For full size beds, fasten the HEADBOARD BRACKETS (42G) to the LEGS (E and F). Use four GOLD 2-3/4" FLAT HEAD
å
BOLTS (109S), four WASHERS (13M) and four NUTS (24M). Then, attach your bedframe to the HEADBOARD
BRACKETS (42G). Use four SILVER 1-1/4" BOLTS (117S), four WASHERS (13M), and four NUTS (24M).
NOTE: Your bedframe must be attached to the headboard as indicated in this step. Notice the HEADBOARD
å
BRACKETS (42G) are positioned diff erently on each side.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
F
Page 14
42G
42G
420870
E
(8 used in this step)
SILVER 1-1/4" BOLT
(4 used in this step)
109S
GOLD 2-3/4" FLAT HEAD BOLT
(4 used in this step)
24M
NUT
(8 used in this step)
13M
WASHER
117S
www.sauder.com/services
Advertisement
