Araknis Networks AN-X20-AP-I Quick Start Manual page 10

Step 5: Configuration
Araknis WAPs can be configured through OvrC or the local interface. The local interface is accessible using OvrC's
webconnect feature, typing the WAP's DHCP address into your browser's address bar, or using the WAP's default
IP address.
Configuration Through OvrC
OvrC gives you Wi-Fi management, remote device management, real-time notifications, and intuitive customer
management, right from your computer or mobile device. Setup is plug-and-play, with no port forwarding or
DDNS address required. To add this device to your OvrC account:
1. Connect the WAP to the Internet
2. Log Into OvrC (www.ovrc.com)
3. Add the Device (MAC address and
Service Tag numbers needed for
authentication)
10