Customizing Your Brave 4 Elite; Photo Settings - Akaso Brave 4 Elite User Manual

EN

Customizing Your Brave 4 Elite

Photo Settings

1. Resolution
20MP/16MP/14MP/10MP/8MP/5MP/2MP (Default setting is 20MP.)
This camera is capable of capturing 20MP photos, with higher resolution offering
greater clarity and detail due to the increased number of pixels. However, higher
resolution photo also results in larger file sizes.
2. Output Format
JPEG/JPEG+DNG (Default setting is JPEG.)
This setting allows you to choose the image format you want.
3. ISO
Auto/100/200/400/600/800/1600/3200 (Default setting is Auto.)
ISO determines the camera's sensitivity to light and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of graininess
in the image. In low light, higher ISO values result in brighter images, but with greater
image noise. Lower values result in lower image noise, but darker images.
4. EV
-2.0/-1.0/0/+1.0/+2.0 (Default setting is 0.)
Sets the exposure value. The larger the number, the larger the brightness. By default,
your camera uses the entire image to determine the appropriate exposure level.
However, Exposure lets you select an area that you want the camera to prioritize
when determining exposure. This setting is particularly useful in shots where an
important region might otherwise be over-or underexposed.
5. Burst Photo
Off/3 shots/7 shots/15 shots/30 shots (Default setting is Off.)
Burst photo allows you to capture several photographs in quick succession, making
it perfect for capturing fast-moving activities.
Heads up:
Burst Photo works in Burst mode only. It will not show in the settings menu when
other modes are enabled.
16