Customizing Your Brave 6 Plus - Akaso BRAVE 6 PLUS User Manual

EN

Customizing Your Brave 6 Plus

Video Settings
1. Resolution
4K 30fps, 2.7K 60fps, 2.7K 30fps, 1080P 120fps, 1080P 60fps, 1080P 30fps, 720P
240fps, 720P 120fps, 720P 60fps (Default setting: 4K 30fps)
This camera is capable of recording video up to 4K30fps, with higher resolution
offering greater clarity and detail due to the increased number of pixels. However,
higher resolution video also results in larger file sizes.
Note: Capturing high-resolution or high-fps videos in low-temperature scenes can
consume more power.
2. Image Stabilization
Off / On (Default setting: Off)
Electronic Image Stabilization (EIS) 2.0 effectively reduces the effect of the camera
shakes, allowing for smooth videos. This feature is suitable for use in riding, skiing,
and handheld scenes.
Note: Image stabilization will be disabled when the video resolution is set to
1080P120fps, 720P240fps, and 720P120fps. It will also be disabled when Loop
Recording Time, Time Lapse Interval, Still Photo Time, Distortion Calibration, and
Slow Motion are enabled.
3. Loop Recording Time
1Min / 3Min /
This option allows you to set the length of videos captured in Loop Recording
mode. For instance, if you set Loop Recording to "3Min", the camera will save
videos every 3 minutes. When the memory is full, new video files will overwrite the
old ones to ensure continuous recording.
Note: Loop Recording Time works in Loop Record mode only.
5Min / 10Min (Default setting: 1Min)
10