Table of Contents
Advertisement
SPECIFICATIONS
NOTE :
Specifications and others are subject to change without notice for improvement.
Application Range
V
This spec sheet is applied to the DLP TV used MD-61A chassis.
Specification
V
Each part is tested as below without special appointment.
1) Temperature : 25±5°C (CST : 40°C±2°C)
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage(240V~ ± 10%, 50Hz)
* Standard Voltage of each products is marked by model.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
Test Method
V
1) performance : LGE TV test method followed.
2) Demanded other specification.
Safety : CB specification
EMC : CE specification
Model Name
62DC1D-AB
62DC1DA-AB
Model Specification
V
No.
Item
1
Broadcasting system
2
Available Channel
3
Tuner IF
4
Video Input(2EA)
5
Monitor Out(1EA)
6
S-Video Input(2EA)
7
Input Voltage
8
Market
9
Screen Size
10
Aspect Ratio
11
Operating Temperature
12
Operating Humidity
13
Storage Temperature
14
Storage Humidity
Market
Australia
Safety : AS/NZS 60065, EMS :AS/NZS CISPR 13
Specification
Min
Typ
PAL B/B, DTV : DVB -T
VHF
00~12
UHF
20~75
CATV
02~ 44
DTV
06~12, 27~69
PAL : 38.90MHz(Picture), 34.40MHz(Soound)
DVB-T : 36.125MHz
PAL-B/G/H/I, PAL-M, NTSC-M, NTSC-44
PAL-B/G/H/I, PAL-M, NTSC-M, NTSC-44
PAL-B/G/H/I, PAL-M, NTSC-M, NTSC-44
240V~, 50Hz
Australia
60 inch
16:9
0
-20
- 7 -
Remark
Max
Unit
Side 1/ Rear 1
Rear 1(Composite Signal)
Side 1/ Rear 1
40
deg
85
%
60
deg
85
%
Remark
Advertisement
Table of Contents
