Specifications - LG RT-44SZ60DB Service Manual

SPECIFICATIONS

NOTE : Specifications and others are subject to change without notice for improvement.
Scope
V
This specification can be applied to the DLP Projection(RT-52SZ60DB)
Test and Inspection Method
V
1) performance:Follow the Standard of LG DND test
2) Standards of Extra requirement
Safety: Follow the standard of CB
EMC : Follow the standard of CE
Test Condition
V
1) Temperature :25¡ 5¡C(But, CST must be tested 40¡C ± 5¡C)
2) Relative Humidity:65¡ 10%
3) PowerVoltage:Standard input voltage(AC 240V¡ 1 0 %, 50Hz)
But Standard input voltage mark value is marked by model.
4) Use the parts only designated in B.O.M.,PARTS SPEC.,or drawings.
5) Follow each drawing or spec for spec and performance of parts,based upon P/N of B.O.M
6) Warm up TV set for more than 5min. before the measurement.
General Specification
V
No
Item
1 Video input applicable
system
2 AV receiving system
3 Available Channel
4 Input Voltage
5 Market
6 Screen size
7 Tuning System
8 Aspect ratio
9 Operating Temperature
10 Operating Humidity
11 Storage Temperature
12 Storage Humidity
Min Typ
1) PAL/ SECAM - B/G
2) PAL/ SECAM - D/K
3) PAL - I/I
4) NTSC - M
1) PAL/ SECAM
2) NTSC - 3.58/4.43
1) VHF : E02~E12
2) UHF : E21~E69
3) CATV : S01~ S20
4) HYPER : S21~S41
AC 240V, 50Hz
Australia
52 inch
FVS 200 Program
16:9 (wide)
0
-20
- 10 -
Specification
Max
40
85
60
85
Remark
Unit
Except PAL-M/N
deg
%
deg
%