Safety Precautions - Castex BR-2250 Operator And Parts Manual

SAFETY PRECAUTIONS

This machine is suited to burnish smooth floor
surfaces in an indoor environment and is not
constructed for any other use. The pick up of any
liquid or hazardous type of dust is prohibited.
Use only recommended burnishing pads and
non–flammable floor cleaners and waxes intended for
machine application.
The following safety alert symbols are used throughout
this manual as indicated in their descriptions.
WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.
CAUTION: To warn of hazards or unsafe
practices which could result in minor personal
injury.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
The following information signals potentially dangerous
conditions to the operator or equipment:
FOR SAFETY
1. Do not operate machine:
– Unless trained and authorized.
– Unless operation manual is read and
understood.
– In flammable or explosive areas.
– Without dust bag in place.
2. Before starting machine:
– Make sure all safety devices are in place
and operate properly.
3. When using machine:
– Go slow on inclines and slippery surfaces.
– Use care when reversing machine.
– Report machine damage or faulty
operation immediately.
4. Before leaving or servicing machine:
– Stop on level surface.
– Turn off machine.
– Remove key.
BR–2250/BR–2500 (11–01)
Home Find... Go To..
5. When servicing machine:
– Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
– Block machine tires before jacking
machine up.
– Use hoist or jack of adequate capacity to
lift machine.
– Disconnect battery connections before
working on machine.
– Wear protective gloves when handling
batteries or battery cables.
– Avoid contact with battery acid.
– Use manufacturer supplied or approved
replacement parts.
WARNING: Batteries emit hydrogen gas.
Explosion or fire can result. Keep sparks and
open flame away. Keep battery compartment open
when charging.
WARNING: Flammable materials or reactive
metals can cause explosion or fire. Do not pick
up.
WARNING: Moving parts. Turn off power
before working on machine.
CAUTION: Pad head must be in full up (pad
load) position before making pad pressure
adjustment.
OPERATION
3