1-3. Opening, closing and locking the doors and trunk
■
Setting and canceling the functions
To switch between setting and canceling, follow the procedure below.
Close all the doors and turn the "POWER" switch to ON mode.
STEP
1
(Perform step 2 within 20 seconds.)
STEP
2
Function
Shift position linked door locking
function
Shift position linked door unlock-
ing function
Speed linked door locking function
Driver's door linked door unlocking
function
When the setting or canceling operation is complete, all doors are locked
and then unlocked.
72
Shift the shift lever to "P" or "N",
and press and hold the driver's
door lock switch (
for approximately 5 seconds and
then release.
The shift lever and switch positions
corresponding to the desired func-
tion to be set are shown as follows.
Use the same procedure to cancel
the function.
Shift lever position
P
N
or
Driver' s door
switch position
)