Troubleshooting - THOMSON WS600DUO Instructions Manual

1. Connect the speakers using the connecting cable provided.
2. Connect to power source: the standby indicator lights up.
When you connect the audio cable, remember to connect the terminals according to the
correct polarity as indicated. *Make sure the black cable is plugged into the same colour
on each speaker (e.g. black power supply to black power supply) and that the black
and white cable is connected to the same colour on each speaker (e.g. red power
supply to red power supply). If the connection is reversed, the sound quality will be lower.
Audio input
1. Press the "Mode" button to select the audio input.
The indicator turns blue for Input 1 and orange for Input 2.
2. Use the appropriate RCA cable to connect an audio source to the speakers.
3. Play music from your connected device and adjust the volume on your device or by
turning the "Mode" button.
Bluetooth operation
1. Turn on the speakers and switch to Bluetooth mode by pressing the main volume button
on the back of the active speaker. The indicator turns blue.
2. Use the "Settings" function of your source device (mobile phone, tablet, etc.) and search
for nearby Bluetooth devices: you will find "WS600DUO" in the list.
3. Pair your device with "WS600DUO".
4. Play the audio tracks on your connected device and adjust the volume according to your
preference.
5. return to the "Settings" of your connected device to disconnect Bluetooth.
Comment: The maximum range is approximately 10 metres. Place your Bluetooth speaker
as close as possible to the connected device to avoid interference with the connection.

Troubleshooting

No sound
Problem
Check that the power indicator is ON.
Try increasing the volume with the central
control knob or the remote control
Make sure the audio cables are securely
connected and the input is properly set to
the speakers.
Check if there is an output signal from the
audio source.
- EN 15 -
Solution