Safety Instructions - Fiap profifeed BeltFeeder PRO Operating Instructions Manual

GB FEEDING
BeltFeeder PRO
profifeed
NOTES ON THESE OPERATING INSTRUCTIONS
Welcome to FIAP GmbH.
BeltFeeder PRO
With the purchase of the product profifeed you have made a
very good choice. Before using the device for the first time, read the operating instruc-
tions carefully and familiarize yourself with the product. All work on and with this device
may only be carried out in accordance with these operating instructions. It is essential to
observe the safety instructions for correct and safe use.
INTENDED USE
BeltFeeder PRO, hereinafter referred to as the device, may only be
profifeed
used for feeding fry, seedlings and for dosing buffer substances or drugs. The housing
and the cover have excellent weather resistance and a long service life. The profifeed
BeltFeeder PRO
is a MUST for every production company or hobby grower.
IMPROPER USE
It can occur in the event of improper use and improper handling
This device poses a risk to people. In the event of improper use, our liability and the gene-
ral operating permit expire.
CE MANUFACTURER'S DECLARATION
We declare conformity in accordance with the EC directive EMC directive
(2014/30 / EU) and the low voltage directive (2014/35 / EU).
The following harmonized standards were applied:
EN 61058-1, EN 60669-2-1

SAFETY INSTRUCTIONS

This device can be used by children aged 8 years and over and by persons with
reduced physical, sensory or mental capabilities or a lack of experience and
knowledge, provided they are supervised or have been instructed in the safe
use of the device and understand the resulting dangers.
Children are not allowed to play with the device. Cleaning and user maintenance should
not be carried out by children without supervision. It is essential to observe the safety
instructions for correct and safe use. Please keep these instructions in a safe place.
If the owner changes, please pass on the instructions.
All work with this device may only be carried out in accordance with these instructions.
The combination of water and electricity can lead to serious danger to life and limb if it
is not connected in accordance with regulations or handled improperly. Only operate the
device when nobody is in the water! Before reaching into the water, always unplug all de-
vices in the water. Compare the electrical data of the power supply with the type plate
on the packaging or on the device. Make sure that the device is protected by a residual
current device with a rated residual current of maximum 30 mA. Only operatethe device
7
from a properly installed socket.