Table of Contents
Advertisement
4. Troubleshooting
4-1-7. No Video (Component 1, 2)
Symptom
Audio is normal but no picture is displayed on the screen.
-
Check the Component source
-
Major
Check the Valencia.
-
checkpoints
Refer to the next page to check the lacation such a CN3004, IC6001 SVC Manual mentioned.
-
7
8
Diagnostics
Caution
Make sure to disconnect the power before working on the IP board.
4-20
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Yes
Check the component source and check the
connection of component cables(Y,Pb,Pr) ?
Yes
Does the component data appear at ?
Comp1 Y : C6143
PB : C6144
PR : C6145
Comp2 Y : C6146
PB : C6147
PR : C6148
Yes
Check the LVDS clk signal at output of
Main board? (TX1~TX4)
TX2_BP, TX2_CN, TX2_CP, TX2_CLKN
TX4_BP, TX4_CN, TX2_CP, TX2_CLKN
Yes
Check the LVDS cable?
Replace the T-con / LCD panel?
No
Check a set in the 'Stand-by mode'.
No
Input the component source properly.
No
Check CN3004.
Change the Main Assy.
No
Check IC7001.
Change the Main Assy.
No
Please, Contact Tech support.
Advertisement
Table of Contents
