Page 1
LED-TV Chassis : N79C Model : UE40C69**VS UE46C69**VS UE55C69**VS UE40C69**VK UE46C69**VK UE55C69**VK SERVICE Manual TFT-LED TV Contents 1. Precautions 2. Product specifications 3. Disassembly and Reassembly 4. Troubleshooting 5. Exploded View & Part List 6. Wiring Diagram UE40C69**VS / UE46C69**VS / UE55C69**VS UE40C69**VK / UE46C69**VK / UE55C69**VK Refer to the service manual in the GSPN (see the rear cover) for the more information.
Page 4
3. Disassembly and Reassemble 3. Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the UE46C6900** LED TV. WARNING: This LED TV contains electrostatically sensitive devices. Use caution when handling these components. 3-1. Disassembly and Reassembly Cautions: 1.
Page 5
3. Disassembly and Reassemble Description Picture Description Screws 2. Remove the screws of rear-cover. 6003-000133 (M4, L8, MACHINE) 6003-001003 (M4, L12, TAPTYPE) 2-1. Pull out a AC Power Cord 3. Lift up the rear-cover.
Page 6
3. Disassembly and Reassemble Description Picture Description Screws 4. Remove the cables and screws from 46 inch SMPS, Main board and Woofer and Bracket stand link. 55 inch 6001-002283 (M3, L5, MACHINE) 6003-000133 (M4, L8, MACHINE)
Page 7
3. Disassembly and Reassemble Description Picture Description Screws 5. Lift up the panel so you can remove front cover. Reassembly procedures are in the reverse order of disassembly procedures. ※...
Page 8
5. Exploded View & Part List 5. Exploded View & Part List 5-1. UE46C6990VS Exploded View R001A CB01 M0014 T0175 PANEL F001A SB05A T0920 T0176 SB04A T0176 5-1-1. UE46C6990VS Parts List Location No. Code No. Description & Specification Q’ty SA/SNA Remark F001A BN96-13748C...
Page 9
5. Exploded View & Part List 5-2. UE46C6990VS Parts List Service Bom (SA: SERVICE AVAILABLE, SNA: SERVICE NOT AVAILABLE) Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark UE46C6990VSXZG S001A BN90-02594K ASSY STAND;UC7000 46/55 SC02A BN96-13131G ASSY COVER P-GUIDE STAND;UC7000,PC+ABS G ...3 T0524 6902-001063...
1. Precautions 1. Precautions 1-1. Safety Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1-1. Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.
1. Precautions 1-2. Servicing Precautions WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.
1. Precautions 1-4. Installation Precautions For safety reasons, more than a people are required for carrying the product. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire.
2. Product specifications 2-2. Detail Factory Option If you replace the main board with new one, please change the factory option as well. ※ The options you must change are "Type" and "Front Color". Model name UE40C6900VS UE46C6900VS UE55C6900VS Vendor Panel CODE BN07-00914A...
Page 28
2. Product specifications If you replace the main board with new one, please change the factory option as well. ※ The options you must change are "Type" and "Front Color". Model name UE40C6900VK UE46C6900VK UE55C6900VK Vendor Panel CODE BN07-00914A BN07-00877A BN07-00878A SPEC LTF400HJ06...
2. Product specifications 2-3. Spec Comparison to the Old Models Model UC6900 UB6000 Design Display Type LED TV LED TV Resolution 1920 x 1080 1920 x 1080 LCD Panel TFT LCD Panel 100Hz TFT LCD Panel 100Hz Screen Size 40", 46", 55" 32", 37", 40", 46", 55"...
2. Product specifications 2-4. Accessories Product Description Code. No Remark Remote Control & Batteries BN59-01039A (AAA x 2) 3903-000525 Power Cord UK : 3903-000539 40" : BN63-06543B Cover-Bottom 46" : BN63-06543B 55" : BN63-06543B Warranty card BN68-00516E BN68-02839D Safety Guide AA68-03242T Supplied Accessories...
Page 31
2. Product specifications PAL On-Air Channel Frequence Table Europe INDONESIA IRELAND South Africa ANGOLA NEWZEALAND ITALY EUROPE FRANCE CIS(OIRT) AUSTRALIA CHINA channel PAL-BG PAL-BG PAL-I PAL-I PAL-I PAL-BG PAL-BG SECAM-BG SECAM-L PALll PAL-I SECAM -DK PAL-BG PAL-D 53.75 47.75 62.25 55.75 60.50...
Page 32
2. Product specifications PAL CATV Channel Frequence Table Europe INDONESIA IRELAND South Africa ANGOLA NEWZEALAND ITALY CCIR FRANCE AUSTRALIA CHINA channel PAL-BG PAL-BG PAL-BG SEAAM SEAAM PAL-BG PAL-BG SEAAM SEAAM-L PALll PALI UK SECAM OIRT PAL-BG PAL-D 69.25 76.25 83.25 90.25 97.25...
2. Product specifications 2-5. Movie Plus: MJC(Motion Judder Cancellation) Technology Example • Motion Judder cancellation for HD film image. • Adaptive Recursive Search (ARS) - Implementation IPC/MJC at same time <Motion Judder> - Search Range Horizontal : ± 72 Pixel, Vertical : ±...
2. Product specifications 2-6. Internet@TV 2-6-1. Overlay Mode It offers contents to maximize the benefits of the large screen size. Overlay Overlay Overlay Overlay Overlay Overlay Overlay Overlay (Dock Mode) (Dock Mode) (Dock Mode) (Dock Mode) (Sidebar Mode) (Sidebar Mode) (Sidebar Mode) (Sidebar Mode) A.
Page 35
2. Product specifications 2-6-3. Yahoo OOBE Description A. All users go through OOBE (Guided Setup) to access the dock the first time. B. All users must specify a location and accept the TOS before the TV Widgets service are accessible. The rest of the screens are optional.
Page 36
2. Product specifications Tutorial: Screens explaining how dock works. Tutorial: Screens explaining the sidebar and global nav buttons. Final screen before dock comes up. 2-16...
Page 37
2. Product specifications 2-6-4. Gallery Widget Overview A. In the TV Widgets, widget gallery services are online services where widget developers publish widgets for download. B. The default widget gallery for the platform is the Widget Gallery Services. C. To find and install new widgets, launch the gallery widget from the dock. D.
Page 38
2. Product specifications 2-6-5. Profile Widget Overview A. The Profile widget is the way to configure your widget environment for your user profile. With the settings widget you can configure: i. Profile Management: Create, edit and switch profiles. ii. Security Settings: Setup a Profile and/or Owner PIN for security purposes. iii.
Page 39
2. Product specifications 2-6-6. Flickr TV Widget Description A. Flickr TV Widget is a Widget for displaying photos from Flickr. You can view your: Personal photos Your sets of photos iii. Explore Flickr’s user community photos Your favorite photos Your contacts’...
Page 40
2. Product specifications Initial Sidebar View A. If the user is not signed and user is signed but user has no photo then the default images will be displayed from the Flickr Explore category. B. If the user is signed in and the user has 1 photo or more photos, then the photos will be displayed in the top portion of the Widget Sidebar.
Page 41
2. Product specifications 2-6-7. Weather Widget Overview A. The Weather Widget utilizes the “Tab View" layout of the Widget Sidebar i. The tab view is a viewable area than contains groups of user interface elements organized under tab headers. ii.
Page 42
2. Product specifications 2-6-9. News Widget Overview A. The News Widget sidebar will then be displayed B. Several stories will be displayed in the top featured area of the Widget Navigation will be available to move from one story to the next These stories are automatically updated by Yahoo! iii.
✎ For more information, visit “www.samsung.com” or contact the Samsung call center. Mobile devices may Using the Message Function need additional software installation. For details, refer to Using this function, you view call arrivals, SMS messages each user’s guide.
Page 44
SMS. You can configure viewing settings for schedule contents on your mobile phones. For the ✎ In Samsung mobile, ScreenShare must be installed and procedures, refer to the mobile phone manual. the supporting application must be executed; then you ✎...
2. Product specifications 2-8. Recorded TV To use the recording or Timeshift function, the connected USB device must be available for recording. Device format is recommended to use USB HDD. N During the Device formatting, do not disconnect the device while formatting is in progress. 2-25...
Compatibility problem. Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.SAMSUNG is not responsible for any data file damage or data loss. Do not disconnect the USB device while it is loading.
2. Product specifications 2-10. Light Sensor Light sensor is used to measure the ambient light level in the enviroment as perceived by the human eye. It is designed to detect bright and dim ambient light conditions as a means of controlling the brightness of a LED display and /or keypad.
4. Troubleshooting 4. Troubleshooting 4-1. Troubleshooting Check the various cable connections first. • Check to see if there is a burnt or damaged cable. • Check to see if there is a disconnected or loose cable connection. • Check to see if the cables are connected according to the connection diagram. Check the power input to the Main Board.
Page 52
4. Troubleshooting Simple flow chart of malfunction Does the TV turn on? Can you see anything on the screen? Can you see OSD menu running on the screen? Can you see Digital Channel broadcast ? Check LVDS cable connected Check the Power Cord to Main Board.
Page 54
The WLAN does not work. An explanation of Equipment other than the WLAN USB stick supplied by Samsung Electronics (as a bundle) will not work. Media play The sharer must support IEEE 801.11 g/b. IEEE 801.11 n is supported.
Page 55
The DLNA server that I could see on the PC Share Manager 1.Check if the PC is turned off. 2. Check if the Samsung TV has suddenly disappeared. What Search TV is set to reject connections in the access control menu should I do? of the Samsung PC Share Manager.
Page 56
4. Troubleshooting I cannot play files with the wmv or flv DLNA Video Play The video play function is not supported for files with these extension. extensions. I cannot use the 20 second Seek DLNA Video Play To use the Seek function while playing at 2x Fast Forward, function while playing at 2x Fast press the Play button to first make the playing speed Forward.
Page 57
4. Troubleshooting 4-1-1. No Power The LEDs on the front panel do not work when connecting the power cord. Symptom The SMPS relay does not work when connecting the power cord. The units appears to be dead. The IP relay or the LEDs on the front panel does not work when connecting the power cord if the cables are improperly connected or the Main Board or SMPS is not functioning.
Page 60
4. Troubleshooting 4-1-2. No Video (Analog PC signal) Symptom Audio is normal but no picture is displayed on the screen. Check the PC source Major Check the Arsenal, Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 62
4. Troubleshooting 4-1-3. No Video (HDMI 1, 2, 3, 4 - Digital Signal) Symptom Audio is normal but no picture is displayed on the screen. Check the HDMI source. Major Check the HDMI switch, Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 64
4. Troubleshooting 4-1-4. No Video (Tuner_CVBS) Symptom Audio is normal but no picture is displayed on the screen. Check the Tuner CVBS source. Major Check the Tuner, Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 66
4. Troubleshooting 4-1-5. No Video (Tuner DTV) Symptom Audio is normal but no picture is displayed on the screen. Check the DTV source. Major Check the Tuner, Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 68
4. Troubleshooting 4-1-6. No Video (Video CVBS 1, 2) Symptom Audio is normal but no picture is displayed on the screen. Check the Video CVBS source Major Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN201 or IC201 SVC Manual mentioned. Power indicator LED is off.
Page 70
4. Troubleshooting 4-1-7. No Video (Component 1, 2) Symptom Audio is normal but no picture is displayed on the screen. Check the Component source Major Check the Valencia. checkpoints Refer to the next page to check the lacation such a CN3004, IC6001 SVC Manual mentioned. Power indicator LED is off.
Page 72
4. Troubleshooting 4-1-8. No Sound (1.Speaker 2.Monitor_out, 3.Optical) Symptom Video is normal but there is no sound.. When the speaker connectors are disconnected or damaged. Major When the sound processing part of the Main Board is not functioning. checkpoints Speaker defect. Check the source and check the connection Input the sound source properly.
Page 74
4. Troubleshooting WAVEFORMS 1 R, G, B, H_sync input signal of IC6001(SDP84) 2 Digital Output Data 3 Signal of HDMI(Data) 4 CVBS Output Signal 5 Tuner_CVBS Output Signal 6 The Signal are Outputed to IC6001 4-24...
Page 76
4. Troubleshooting 0 Speaker / Monitor OUT , SPDIF OUT 4-26...
Page 77
4. Troubleshooting PD BOARD DIAGNOSIS General PD board Diagnosis Disconnect the wire between PD board and Main board. Short Circuit 16pin and 18pin of CNM801 ▶ If the BLU on , we can consider PD board is acting correctly. LED Driver output diagnosis Measure voltage at CD9113, CD9213, CD9313, CD9413 which are criteria for judgement.
Page 78
4. Troubleshooting Connecting a PC Using the D-sub cable Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
4. Troubleshooting 4-2. Alignments and Adjustments 4-2-1. General Alignment instruction Usually, a color LCD-TV needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync. Use the specified test equipment or its equivalent. Correct impedance matching is essential.
Page 80
4. Troubleshooting 4-3. Factory Mode Adjustments 4-3-1 Entering Factory Mode To enter ‘Service Mode’ Press the remote -control keys in this sequence : - If you do not have Factory remote - control INFO MENU MUTE Power on - If you have Factory remote - control PICTURE ON INFO FACTORY...
Page 81
4. Troubleshooting 4-3-3 Factory Data Option Item Range OPTION Factory Reset Inch Vendor(A:AMLCD, D:CMO, L:AUO, I:CPT) Panel frequency (6:50/60Hz, 1:100/120Hz, 2:200/240Hz) Panel(A:AG, T:TN, U:UC) Select Type Resolution(F:FHD, H:HD, U:UD) Panel Type Panel 1st/2nd(1st:0, 2nd:1) BLU (C:CCFL, L:LED, E:EDGE LED) ex) 32D1UF0E : Vendor : CMO inch : 32 120Hz FHD U/C Edge LED panel Local Set EU, EU_Italy, EU_Africa, EU_Israel, NORDIG, AD_Au, CIS...
Page 82
4. Troubleshooting Control Item Range EDID EDID ON/OFF EDID WRITE ALL SUCCESS EDID WRITE PC SUCCESS EDID WRITE HDMI SUCCESS EDID WRITE HDMI1 … EDID WRITE HDMI2 … EDID WRITE HDMI3 … EDID WRITE HDMI4 … EDID 1.2PORT NONE,Not Support NONE, W-Milky, T-M-Brn, T-W-Brn, T-W-Gray, W-D-Gray, W-M-Whit Front Color W-Violet, T-C-Gray, T-R-BLK, S-BLK, S-C-Gray...
Page 83
4. Troubleshooting Item Range Hotel Option HOTEEL MODE POWER ON CHANNEL POWER ON BAND POWER ON VOLUME MAX VOLUME PANEL BUTTOM LOCK POWER ON SOURCE Item Range Shop Option Shop Mode USB DEMO ON(SEC) USB DEMO OFF(SEC) Item Range Test for input Scaler.
Page 84
4. Troubleshooting Item Range WB Movie W/B Movie ON/OFF ON/OFF MODE Dynamic/Movie/Natural Color Tone Cool/NORMAL/WARM1/WARM2 MSub Brightness Msub Contrast N_Rgain N_Bgain N_Roffset N_Boffset W1_Rgain … W1_Bgain … W1_Roffset … W1_Boffset … W2_Rgain … W2_Bgain … W2_Roffset … W2_Boffset … Movie Contrast Movie Bright Movie Color Movie Sharpness...
Page 85
4. Troubleshooting Item Range ColorMapping Auto_Red_R Auto_Red_G Auto_Red_B Auto_Green_R Auto_Green_G Auto_Green_B Auto_Blue_R Auto_Blue_G Auto_Blue_B Auto_Yellow_R Auto_Yellow_G Auto_Yellow_B Auto_Cyan_R Auto_Cyan_G Auto_Cyan_B Auto_Magenta_R Auto_Magenta_G Auto_Magenta_B Item Range EPA 3D Standard Contrast Standard Brightness Standard Sharpness Standard Color Standard Tint Standard Backlight 3D Contrast 3D Brightness V_3D PWM Delay_60 V_3D ANA Delay_60...
Page 93
4. Troubleshooting 4-4. White Balance - Calibration 4-4-1 White Balance -Calibration AV Calibration ADC/WB Comp Calibration PC Calibration HDMI Calibration 4-4-2 Service Adjustment You must perform Calibration in the Lattice Pattern before adjusting the White Balance. Color Calibration Adjust spec. 1.
Page 94
4. Troubleshooting Method of Color Calibration (AV) 1) Apply the NTSC Lattice (N0.2) pattern signal to the AV IN 1 port 2) Press the Source key to switch to “AV1” mode 3) Enter Service mode 4) Select the “ADC/WB” and “ADB” menu 5) Select the “AV Calibration”...
Page 95
4-5. Servicing Information 4-5-1 Upgrading the Software Samsung may offer upgrades for TV’s firmware in the future. Upgrades will be possible by connecting a USB drive to the USB port located on your TV. Insert a USB drive containing the firmware upgrade into the Wiselink Pro port on the side of the TV.
Page 96
1) The message “Does the problem still exist with this test pattern?” is displayed. 2) Press “Yes”. This is a TV SET problem. The massage “Contact Samsung’s call center at 1-800-SAMSUNG for assistance.” is displayed. 3) Press “No”. This is not a TV SET problem.
Page 97
1) The message “Does the problem still exist with this sound test?” is displayed. 2) Press “Yes”. This is a TV SET problem. The message “Contact Samsung’s call center at 1-800-SAMSUNG for assistance.”is displayed 3) Press “No”. This is not a TV SET problem.
6. Wiring Diagram 6-3. Connector Functions Connector Functions Supply power from SMPS to Main Board. CNM802 CN2 CNL803 CN8501 Supply power from SMPS to Main Board (Local Dimming). CN1201 T-CON The LVDS signal transfered from Main Board to Panel. 6-4.