Table of Contents
Advertisement
2. Product specifications
2-9. Media Play
2-9-1 Using the Media Play Function
This function enables you to view and listen to photo(JPEG), audio files(MP3) and movie(MPEG) saved on a USB Mass
Storage Class (MSC) device.
1.
Press the POWER button on the remote control or front panel.
- The TV is powered on.
2.
Connect a USB device containing JPEG and/or MP3 and or/MPEG
files to the usb jack (USB jack) on the side of the TV.
-
(If you enter the Media Play mode with no USB device
connected the message "No external storage device found.
Check the connection status." will appear. In this case, insert
the USB device, exit the screen by pressing the MEDIA.P
button on the remote control and enter the MEDIA.P screen
again.
-
MTP (Media Transfer Protocol) is not supported.
-
The file system only supports FAT16/32 (The NTFS file
system is supported).
-
Certain types of USB Digital camera and audio devices may
not be compatible with this TV.
-
Media Play only supports USB Mass Storage Class devices
(MSC). MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers (Both USB HDD and HUB are not supported.)
-
Please connect directly to the USB port of your TV. If you are
using a separate cable connection, there may be a USB
Compatibility problem.
-
Before connecting your device to the TV, please back up your
files to prevent them from damage or loss of data.SAMSUNG is
not responsible for any data file damage or data loss.
-
Do not disconnect the USB device while it is loading.
-
MSC supports MP3 and JPEG files, while a PTP device
supports JPEG files only.
-
The sequential jpeg format is supported.
-
Photo and audio files must be named in English, French or
Spanish. If not, the files can not be played. Change the file
names to English, French or Spanish if necessary.
-
The higher the resolution of the image, the longer it takes to
display on the screen.
-
The maximum supported JPEG resolution is 15360 x 8640
pixels.
-
For unsupported or corrupted files, the "Not Supported File
Format" message is displayed.
2-26
Advertisement
Table of Contents
