Table of Contents
Advertisement
Settings
10.
Water hardness
11.
TAB
12.
Auto dose
13.
Super rinse
14.
Interior light at
power off
15.
Odor control
Alternatives
0/1/2/3/4/5/6/7/8/9
Default: 0
On/Off
0 tsp, 3-8 tsp
On/Off
On/Off
On/Off
Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct.
See Water hardness in the chapter Before
washing for the first time.
For a water supply with a hardness below
6°dH (10°fH / 7°eH / 1.0 mmol/l / 6.0 gr/gal),
select 0. The water softener is deactivated
and no salt needs to be added.
Activate this setting when using an all-in-one
detergent that contains rinse aid.
This setting reduces the rinse aid dosage
and affects how often the dishwasher's
built-in softener is regenerated.
Activate this setting if you want to use
automatic detergent dosing.
The exact dosage depends on which
program is running. For the Auto program,
the dosage also depends on how dirty the
dishes are.
0 tsp (Off)
The Super rinse function rinses the dishes an
extra two times.
The program time is extended and the
dishwasher uses more energy and water.
Activated in the following programs:
Normal
Light
Intensive
Quick pro
Sanitize
Plastic
Lower half
Upper half
Select whether the interior light is to be
switched on when the dishwasher is turned
off and the door is opened. (If
on, the interior light is always switched on
when the door is opened.)
When Odor control is activated,
can be selected from the program table.
Settings
is turned
Anti-odor
33
Advertisement
Table of Contents
