Download Print this page

Canon PIXMA MG6120 Service Manual page 12

Hide thumbs Also See for PIXMA MG6120:

Advertisement

scanner device.
Premium
Contents print
error.
1-3. Service Call Error (by Cyclic Blinking of Alarm and Power LEDs) Troubleshooting
Service call errors are indicated by the number of cycles the Alarm and Power LEDs blink, and the corresponding
error code with the message, "Printer error has occurred. Turn off power then back on again. If problem persists,
see the manual." is displayed on the LCD.
1) Check each point in "Check points & Solution," and perform the solution if it applies.
2) When no solution in "Check points & Solution" is effective, then replace the part listed under "Parts to be
replaced" one by one from the one most likely to be faulty. The parts are listed in the order of likeliness to be
faulty.
Cycles of
blinking of
Alarm and
Power LEDs
2 times
Carriage error
3 times
Line feed error
occurred. Press [OK]. middle of scanning operation, and
[4100]
---
Cannot print the data. Install the supported (Canon-
Error
Error
code
[5100]
(1) Smearing or scratches on the carriage slit
(2) Foreign material that obstructs the
(3) Ink tank conditions:
(4) Cable connection:
(5) Scratches or damages to the carriage slit
(6) Black debris around the carriage rail or
[6000]
(1) Opening and closing of the paper output
60 minutes have elapsed since
then, making re-scanning
unstable. Press the OK button to
clear the error.
genuine) ink tanks.
Check points & Solution
film:
Clean the film using lint-free paper.
carriage movement:
Remove foreign material.
Re-set the ink tanks.
- CR FFC (CN401, CN402, CN403)
- Motor multi harness ass'y
Re-connect the cables.
If any damage or breakage of the
cable is found, replace the cable.
film:
Replace the timing slit strip film.
pressure roller:
Replace the carriage unit.
tray:
Remove obstacles from around the
paper output tray so that the tray
8 / 66
- Ink tank
Parts to be
replaced (when
no solution is
effective)
- Logic board
ass'y
- Carriage motor
- Carriage unit
- Motor multi
harness ass'y
- Timing slit disk
feed film
- Timing slit disk
eject film

Advertisement

loading