Gps - Pharos Traveler 137E User Manual

Pharos traveler 137e: user guide
Table of Contents

Advertisement

4. Select an event from the drop-down list (incoming call, reminder and message),
then change the device's reactions for this event from other drop-down lists.
5. Select OK to apply the changes.
Restoring a Profile
1. Select Start > Programs > Profile Manager.
2. Select Menu > Reset all to default.
3. Select OK.
Using Audio Files as Ring Tones
You can use your own audio files as a ring tone. Open File Explorer, select and hold the
file, then select the Set As Ringtone command.

9.6 GPS

A GPS (Global Positioning System) signal receiver is built in the device. You have to
install a mapping software on the device to start navigating. Please follow the instruction
of your mapping software to install it and use the navigation functions. You may need
to specify the GPS hardware port when installing the mapping software. Select the
following value if requested.
• GPS hardware port: COM9
• Baud rate: 4800
IMPORTANT: Some mapping software or GPS navigation software may not be compatible with
the device, please consult with the software provider/retailer before installing the software.
NOTE: Your device is equipped with aGPS (Assisted GPS), please consult with your service
provider to see if this function is supported.
Using aGPS may be charged extra fee by your service provider.
85

Advertisement

Table of Contents
loading

Table of Contents