Getting Started - Pharos Traveler 137E User Manual

2.1 Getting Started

Turning the Device On/Off
a) When the device is off: press the Power button to turn on the device.
b) When the device is turned on: press the Power button to switch the
device into sleep mode. You can still receive phone calls and messages when
the device is in sleep mode. (When there is an incoming call, device will wake up
automatically; when there is a new message, the LED will display blue blinks.)
c) When the device is in sleep mode: press the Power button to wake up the device.
d) To power off the device completely, press and hold the Power button for 3 seconds
and the system will ask you to confirm before powering off the device.
Calibrating the Device
Calibrating the device ensures that the screen will correctly respond to your stylus.
When you turn on the device for the first of time, you will be asked to calibrate the
device. If you would like to re-calibrate the device, follow the steps below:
1. Select Start > Settings > System tab > Screen.
2. Select the Align Screen button and follow the on-screen instructions.
Resetting the Device
If the device is performing abnormally, you can soft reset it to shut down all active
programs and then restart the device. Use the stylus to press the Reset button
located at the top side of the device to perform a soft reset.
Moreover, the device can be restored to its default settings after having a hard
reset. Select Start > System tab > Factory Reset, then follow the instruction on
the screen. It is suggested to perform a hard reset only if a soft reset does not work.
Please remember to backup any additional installed programs and user data before
performing a hard reset; otherwise, all of them on the device will be lost.
20