Table of Contents
Advertisement
1.1 Introduction
Hardware Overview
1
Mini-USB cable & headphone connector & Charger connector.
2
Power.
Press to turn on the device.
3
Reset.
With the stylus, press to soft reset the device. Be sure to switch the device into sleep mode before resetting the
device; otherwise, unsaved data or settings may be lost.
4
Stylus.
5
Forward facing camera.
6
Telephone receiver.
Speaker for listening to phone calls.
Indication LED.
Indicates status of Battery (priority one), notification (priority two), GPS (priority three), Bluetooth (priority
7
four) and GSM (priority five). The LED displays solid red or green light when the battery is under charging or full charged.
The blue light flashes on every three seconds when there is a notification; the blue light flashes on every five seconds or 10
seconds when the GPS or the Bluetooth is on.The green light flashes on every five seconds when the GSM/UMTS service
is available. The green light flashes on every 10 seconds when there is no signal from your operator; however, you can still
make emergency calls through other operators if available.
8
Touch screen.
3.5-inch TFT LCD touch screen display.
9
TALK: Press to activate the dialer and to initiate a call.
10
START: Press to pull down the Start menu.
11
Navigation Wheel &
Select: Scroll up, down, left or right to navigate; press to select.
12
OK: Press to perform OK/Close.
13
END/HOME: Press to end a call or return to the Today screen.
14
Microphone.
15
Volume up.
Press to turn up the volume.
16
Volume down.
Press to turn down the volume.
Camera key*.
Press to launch the camera.
17
18
Main camera.
19
Speaker.
20
Back cover.
* This button is configurable. To assign new programs/functions, select Start > Settings > Buttons.
10
Use this camera for video calling.
Advertisement
Table of Contents
