ecactus WH-SPHA3.6H-5.12kWh User Manual page 26

Step 5：GRID and EPS cables
Open the waterproof cover plate and connect according to the type description on
the box. Open the press nut of the waterproof joint and pull out the seal race. Then
penetrate the wire into the hole.
Note: The length of the cable shall be less than 30 meters.
Pressed cable :
1. Peel off the L/N/PE cable end of 7mm length.
2. Put the "I" terminal into the cable and press it tightly with pressure line clamps.
26