Graco Reactor A Series Operation page 24

13.
Ground system
WARNING
Read warnings, page 8.
a.
Reactor: is grounded through power
cord. See page 18.
b.
Spray gun: connect whip hose ground
wire to FTS, page 21. Do not disconnect
wire or spray without whip hose.
c.
Fluid supply containers: follow your local
code.
d.
Object being sprayed: follow your local
code.
e.
Solvent pails used when flushing: follow
your local code. Use only metal pails,
which are conductive, placed on a
grounded surface. Do not place pail on
a nonconductive surface, such as paper
or cardboard, which interrupts ground-
ing continuity.
f.
To maintain grounding continuity when
flushing or relieving pressure, hold a
metal part of spray gun firmly to the side
of a grounded metal pail, then trigger
gun.
24
14.
Fill wet-cups
WARNING
Pump rod and connecting rod move during operation.
Moving parts can cause serious injury such as pinch-
ing or amputation. Keep hands and fingers away from
wet-cups (R) during operation. Shut off pumps before
filling wet cups.
Check pump wet-cups (R) daily. Keep filled with Graco
ISO pump oil, Part No. 217374, to keep air or moisture
from reacting with fluids.
R
Setup
TI3582-3
309812D