Download Print this page

Campbell RV50 Quick Deploy Manual

Sierra wireless airlink 4g lte cellular modem for public static ip addresses
Hide thumbs Also See for RV50:

Advertisement

Quick Links

Part Number #35781
Revision: 04/2021
1. Introduction
NOTE:
This Quick Deploy Guide is a general reference to give the
installer an overview of the steps required to make this
system operational. The Product Manual is the definitive
source for detailed installation instructions and
information.
For best results, update to the latest data logger
operating system and version of Device Configuration
Utility.
You should have received two Quick Deploy Guides with your
RV50(X) module. The one you follow will depend on whether
your module was configured with a private dynamic or public
static IP address.
The Provisioning Report received with your Cellular Data
Service shows whether the module was configured with a
private dynamic or public static IP address. See the following
figure for an example of a Campbell Scientific Provisioning
Report. Other cellular providers should provide similar
information.
USE THIS GUIDE if your module has a public static IP address.
Sierra Wireless Airlink®
4G LTE Cellular Modem
For Public Static IP Addresses
CSL I.D - 1313
www.campbellsci.eu/rv50x
FIGURE 1-1. Static IP provisioning report
Additionally, Campbell Scientific cellular modules configured
with a public static IP address will have two stickers on the
module, as shown in the following figure. One sticker will show
the module phone number and data plan. The second sticker
will show the static IP address. USE THIS GUIDE.
Campbell Scientific cellular modules configured with a private
dynamic IP address will have one sticker on the module. It will
show the module phone number and data plan. USE THE
OTHER GUIDE.
FIGURE 1-2. Module with public static IP address
2. Campbell Scientific cellular data
service
Campbell Scientific can provide subscriptions to cellular
service through Verizon, AT&T, T-Mobile, Vodafone, Telstra,
and over 600 other providers worldwide. When this cellular
service is purchased with the module, the module will come
pre-provisioned with the required SIM card and APN. If you
have already purchased the RV50(X), call Campbell Scientific
to set up service.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the RV50 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Campbell RV50

  • Page 1 You should have received two Quick Deploy Guides with your Campbell Scientific can provide subscriptions to cellular RV50(X) module. The one you follow will depend on whether service through Verizon, AT&T, T-Mobile, Vodafone, Telstra, your module was configured with a private dynamic or public and over 600 other providers worldwide.
  • Page 2 2. Note the location of the notched corner for correct alignment. The gold contact points of the SIM face 5. Connect the power cable to the RV50(X) DC Power down when inserting the SIM card as shown in the input. When the RV50(X) is properly set up and following figure.
  • Page 3 On the Datalogger tab, make note of the data logger PakBus be changed from the Admin tab. Address (default address is 1). WARNING: Failure to set a strong password in the RV50(X) may result in misuse of the modem by malware or hackers. Significant data overage charges may apply.
  • Page 4 3. Add a data logger to the PakBusPort. appropriate station and click Connect to initiate a call to the 4. Select the IPPort in the Network Map. Enter the RV50(X) data logger. The data logger must have 12 V power.

This manual is also suitable for:

Rv50x35781