5. TEST MODE
5.1. PROCEDURE TO ACTIVATE TEST MODES
-
The appliance must be plugged-in and in stand-by mode.
-
Remove the drip tray. The GROUNDS CONTAINER icon will flash
-
Hold the combination of the below three button pressed (depending on the model):
until the GROUNDS CONTAINER icon will turn OFF and the LEDs of the below buttons (depending
on the model) will start flashing:
[10]
ECAM29X.6Y
ECAM29X.8Y
ECAM29X.6Y
ECAM29X.8Y
Doc. Nr.: DSDL_21008_A