Assembly; Riding Basics - Hiboy TITAN User Manual

3. Assembly

1. Take the scooter out of the box, unfold the scooter
and tighten the folding mechanism as the picture.
3. Loosen the folding mechanism (circle metal)
to fold the scooter.
2. Use a proper Allen Wrench to tighten the
two screws of handlebar.
4

4. Riding Basics

Always wear a helmet and safety gear so to avoid falling and injury during the driving learning,
Preparation for riding
Prepare the product according to the instructions. Always wear a helmet and safety
gear so to avoid falling and injury during the driving learning, as shown in the
figure. Keep away from vehicles and crowded areas.
Riding
1. Click the power button to start your scooter
2. Click "+" and "-"button to adjust Speed Mode( Mode1(ECO), Mode2(STD),
Mode3(TURBO))
3. Step on the deck of scooter and propel yourself, then press throttle lever to
ride your scooter.
Handlebar Operation Instructions
1.Press the yellow button to start the ring bell
2.Press the red button to open the headlight
3.Use your left hand to operate the rear brake.
4.Use your right hand to operate the front brake.
5.Press the right thumb accelerator to control the speed when riding
as shown in the figure.
5