Advertisement
2. Assembly
Rear shock absorber
Rear fork mount
Aligne hole of the rear shock absorber and
1
hole of the rear fork.
Put on M8*40mm
2
cylindrical head screws with socket head
cap, then covered with M8 nylon lock nut
at the other end.
Tighten the screws and
3
nuts by a 6mm Allen key and 13mm open-end
wrench.
2
Handlebar assembly
M8*20mm screws with
hexagon socket head cap
Up aluminum assembly
Down aluminum assembly
Put the handlebar assembly on the up
1
assembly, move it symmetrically
aluminum
and adjust it to the right angle for your
riding.
Put on the up
assembly, then put
aluminum
2
on 4pcs M8*20mm cylindrical head socket
head cap screws .
Tighten the screws with a 6mm socket
3
head wrench.
3
Advertisement
