Operation; Control Panel; Continuous Mode - Prem-I-Air EH1936 Instruction Manual

5. OPERATION

5.1 CONTROL PANEL

Power
After switching on the power, all the indicators and the screen will be lit for 1 second and then turn off. A
buzzer will sound, and the power indicator light will be on and the machine will be in standby mode.
Press the power button again and the appliance will start, the machines default initial humidity setting is
50%RH, the mode is set to continuous. Press the CONT button to exit continuous drying mode and enter
Normal Mode.
Press this key again, the machine will stop running, and the fan will stop after approx. 30s.

CONTINUOUS MODE

Press this button to enter continuous drying mode. The machine continues to run in de-
humidifying mode with a default humidity level of 50%RH. The humidity level cannot be modified in this
mode. For Normal operation press the CONT button.
ADD & MINUS Buttons
In Normal mode you can use these buttons to adjust the set humidity: every time you press
the add will increase by 5%, the minus will decrease by 5%. The humidity can range from a minimum of
20% to a maximum of 90%.
Timer
Press this key to set the timer function of 1-24 hours.
the ADD or MINUS buttons, the value increases/decreases by 1 hour and then the corresponding timing
value is displayed on the screen. Press this button again to turn off the timer.
After the timer is set and completed, the timer LED is on during the timing period. After the timing
period the timer LED turns off automatically.
In the running state, set the time to turn off the machine.
in the standby state, set the time to turn on the machine.
The interval is 1 hour. Each time you press