Switch 4500G Pwr 24-Port And 48-Port Front Panel Leds - 3Com 4500G Series Getting Started Manual

Switch 4500G PWR
24-Port and 48-Port
Front Panel LEDs
Table 4 describes the
Switch 4500G PWR 24-Port and PWR 48-Port units' LEDs.
Table 4 Switch 4500G PWR 24-Port and 48-Port Front Panel LEDs
LED Label Status
Mode LED Mode Rate mode
Duplex
mode
PoE mode
Power LED PWR Green, ON
Green, blinking (1 Hz)
Red, ON
Yellow, blinking (1 Hz)
OFF
Module LED Module Green, ON
(MOD)
Yellow, blinking
OFF

Switch 4500G PWR 24-Port and 48-Port Front Panel LEDs

Green, ON
Yellow, ON
Green,
blinking (1 Hz)
Description
The port status LEDs are
showing the port rate.
The port status LEDs are
showing the duplex mode of
the port.
The port status LEDs are
showing the PoE status of the
port.
The switch starts normally.
The system is performing
power-on self test (POST).
The POST fails the POST.
One or more ports fail the
POST.
The switch is powered off.
The module is installed and
operates normally.
The module is not supported
or is in trouble.
The module is not installed.
15