3Com 4500G Series Getting Started Manual page 22

Hide thumbs Also See for 4500G Series:

Table of Contents

2: I

HAPTER

NSTALLING THE

WITCH

Figure 12 Positions for screw mounting on the switch

Follow the steps below to mount the rear bracket:

1 Use screws to fix the rear bracket to the rear mount angle.

2 Determine the position for screw mounting on the switch according to the

position of the mount angle.

3 Mount the screw to the switch and make sure the screw and the rear bracket are

closely connected.

Figure 13 Installation completed 1

Rear bracket

Screw 1: Fix the rear bracket to the mount

angle.

Three positions for screw mounting

Screw 2

Screw 2 is mounted to the switch.

Screw 1

Rear mount

angle

Table of Contents

4500g 24-port 4500g 48-port 4500g pwr 24-port 4500g pwr 48-port