1. Manuals
  2. Brands
  3. TransTel Communications Manuals
  4. Telephone System
  5. TD-824i
  6. Installation and programming manual

TransTel Communications TD-824-I Installation And Programming Manual

Digital telephone system
Hide thumbs Also See for TD-824-I:
Table of Contents

Advertisement

Quick Links

Download this manual

Notification

Notification is hereby given that TransTel Communications Inc. reserves the right to modify, change, update or
revise this document from time to time as required without the prior obligation to notify any person, company or
organization. Further, TransTel makes no warranty or representation, either expressed or implied, with respect to
merchantability, or fitness of its products for a particular purpose.
© 2001-2006 TransTel Communications Incorporated
This document or any parts thereof are not to be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying, recording, or information storage and retrieval systems for any purpose
whatsoever without the express written permission of TransTel Communications Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TD-824-I and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TransTel Communications TD-824-I

Summary of Contents for TransTel Communications TD-824-I

  • Page 1: Notification

    Notification Notification is hereby given that TransTel Communications Inc. reserves the right to modify, change, update or revise this document from time to time as required without the prior obligation to notify any person, company or organization. Further, TransTel makes no warranty or representation, either expressed or implied, with respect to merchantability, or fitness of its products for a particular purpose.
  • Page 2 4. Use caution when installing or modifying telephone lines. The TransTel TD-824-I utilizes a 3-prong grounding power supply cord. This cord is not to be attached to any building surfaces. When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1.

  • Page 4: Table Of Contents

    TransTel Model TD-824-I Digital Telephone System General Description - Installation - Programming Forms Manual Table of Contents Notification..................................1 General Description - Introduction ..........................10 FCC Rules and Regulation..............................10 FCC Registration Number ............................10 Ringer Equivalence Number ............................10 Notification of the Telephone Company........................10 Incidence of Harm to the Telephone Lines.........................10...
  • Page 5 TransTel Model TD-824-I Digital Telephone System – Table Of Contents Installing expansion and optional cards........................23 TD-CFC - Conference Card............................ 24 TD-MSC - Multi Service Card ..........................24 G1-VSC - Voice Service Card ..........................24 TD-TKU - 4 Port CO Line Card ..........................25 TD-STC - Digital Station Expansion Card......................
  • Page 6 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 05-14 - System Parameters Form – Miscellaneous ..................70 G1-10a6 Form 06-01 - Relay Assignment Form: ......................71 G1-10a6 Form 06-st – ACP/Doorphone Relay Assignment Form: .................71...
  • Page 7 TransTel Model TD-824-I Digital Telephone System – Table Of Contents Form 74 - Least Cost Routing - Digit String Analysis Table: ................... 136 Form 74 - Least Cost Routing - Digit String Analysis Table: ................... 137 Form 76 - Least Cost Routing - Routing Table Normal Operation: ............... 138 Form 76 - Least Cost Routing - Routing Table Special Day Rate: ................
  • Page 8 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Answering Calls..............................170 Answering a Doorphone............................171 Answer Paging (Meet Me Page) ..........................171 Automatic Callback ..............................171 Automatic Last Number Redial..........................172 Automatic Line Access............................172 Automatic Redial ..............................172 Automatic Saved Number Redial ..........................172 Background Music ..............................173...
  • Page 9 TransTel Model TD-824-I Digital Telephone System – Table Of Contents Voice Mail Message Retrieval ..........................190 Voice Mail Transfer Key............................190 Volume Control..............................190 Volume Levels Programming (Permanent)......................191 Access Control Phone Operation Manual ........................ 192 Intercom (as doorphone)............................192...

  • Page 10: General Description - Introduction

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual General Description - Introduction ® The General Description section contains an easy to understand overview of the TransTel TD-824i Digital Telephone System. It is the intent of this document to provide both technical and non-technical readers with information pertaining to the system building blocks, capabilities, key highlights, electrical, physical and environmental characteristics of the TransTel TD-824i Digital Telephone System.

  • Page 11: Compatibility Of The Telephone Network And Terminal Equipment

    TransTel Model TD-824-I Digital Telephone System – General Description Compatibility of the Telephone Network and Terminal Equipment. Availability of telephone interface information. Technical information concerning interface parameters and specifications not specified in FCC Rules, including the number of Ringers which may be connected to a particular line, which is...

  • Page 12: Description

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Description The TD-824i is an advanced digital telephone system employing a microprocessor stored program and digitally controlled solid state time-division switching. The TD-824i system is specifically designed for small business as well as residential applications.

  • Page 13: Easy Maintenance

    TransTel Model TD-824-I Digital Telephone System – General Description Easy Maintenance • Solid-state design minimizes trouble and eliminates periodic maintenance. • Easy Expansion. Various Interface Cards for simple, modular expansion. • Versatile programming and options for ease of selection. •...
  • Page 14 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual TransTel Telephone Model DK-1/D TransTel Telephone Model DK-3/D TransTel Telephone DK-2 (shown with optional 66 button DK-2DSS console) The DK-2 expands the LCD display to a 4 line indication, providing an enhanced view ot call progress and adding the ability to utilize the 4 “Softkeys”...

  • Page 15: System Specifications

    TransTel Model TD-824-I Digital Telephone System – General Description System Specifications System Capacities / Maximum CO/PABX Lines Key Telephones / ACP / Digital Doorphones (Maximum) Single Line Phones(Maximum) Control Relay 1 per cabinet 1 per ACP or Digital Doorphone External Input Sensor...

  • Page 16: Mechanical Specifications (Key Service Unit)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual MAXIMUM LOOP RESISTANCE/IMPEDANCE Digital Key Telephone Less than 40 ohms 26 AWG / 650 feet (200 meters) Single Line telephone Less than 800 ohms 22 AWG / 2,620 feet (800 meters)

  • Page 17: Features

    TransTel Model TD-824-I Digital Telephone System – General Description Features System Features 1A2 Emulation Intercom Attendant Console Assigment (4) Consoles Intercom Single Digit Assignment Account Code Capability Intercom Ring / Voice Select Attendant Overflow Intercom Dialing Restriction Automatic Line Access...

  • Page 18: Station Features

    Station Features Flash (Open Loop Timed Flash) Advisory Messages Group Listen System Hands-free Answer Back Personal Hearing Aid Compatibility Access to System Programming from any station Headset Compatibility Account Code Capability Hold (Exclusive / System) Auto Hold Hold Recall Auto Hold Recall I Hold Indication Automatic Call Back I Use Indication...

  • Page 19: Parts & Peripherals

    TransTel Model TD-824-I Digital Telephone System – General Description Parts & Peripherals System Modules Model Description TD-824i KSU with 4 CO lines, 4 Digital twin ports TD-TKU-4 Trunk Card : 4 CO lines TD-CID/FSK Caller ID daughterboard. Installs on TD-TKU-4. Converts 4 lines for Caller ID Features.

  • Page 20: Optional Interface Cards

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Optional Interface Cards Model Description TD-VSC Voice Service Card (60 sec. / 8 voice segments)- Auto Attendant, Wake-up, Message Waiting TD-MSC RS232/Relay/Sensor/External Paging Interface TD-CFC Conference / Expansion Card –...

  • Page 21: System Installation - Introduction

    TransTel Model TD-824-I Digital Telephone System – System Installation System Installation - Introduction This section provides directions for installing the system and optional equipment. The installation must be performed by qualified service personnel. Main components of the system are: Optional Expansion Cards: •...

  • Page 22: Site Requirements

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Site Requirements Location Choosing The Right Environment • System should be installed in a clean, dry, secure location. This location must have adequate ventilation, and a temperature from 0ºC to 45ºC (32ºF to 113ºF), with 10% to 95% non-condensing relative humidity.

  • Page 23: Installation

    TransTel Model TD-824-I Digital Telephone System – System Installation Installation Caution 1. This system should be installed only by qualified service personnel. 2. Do not install the Power Supply unless you have read the following instructions and completed all the installation and wiring.

  • Page 24: Td-Cfc - Conference Card

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Installing expansion and option cards (continued) TD-CFC - Conference Card Install this card on CN6 of the TD-MBU. Be sure that the component side of the TD-CFC is facing in towards right of KSU.

  • Page 25: Td-Tku - 4 Port Co Line Card

    TransTel Model TD-824-I Digital Telephone System – System Installation TD-TKU - 4 Port CO Line Card Align four holes of TD-TKU with the standoffs on top of the existing TD-TKU or TD-SIU card provided for in the basic key service unit. Once aligned, place the four screws into the standoff securing the TD-TKU card.

  • Page 26: Td-Stc - Digital Station Expansion Card

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual TD-STC - Digital Station Expansion Card TD-STC – Digital Station Expansion Card For the 1 TD-STC card: This expands KSU from 8 to 16 stations.

  • Page 27: Td-Slc - Single Line Station Adapter Card

    TransTel Model TD-824-I Digital Telephone System – System Installation TD-SLC - Single Line Station Adapter Card Install G1-SLC on TD-MBU: Connect the attached cable between CN1 of TD-SLC card to CN7 of the TD-MBU. Align four screw holes on the TD-SLC with the standoffs.

  • Page 28: Voltage Selection Check

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Voltage Selection Check Make a check to assure the power supply jumper setting is for the proper voltage. When complete, place the power supply cover back on the power supply.

  • Page 29: Preparing The External Battery Backup

    TransTel Model TD-824-I Digital Telephone System – System Installation Preparing The External Battery Backup The Key Service Unit can have two external backup batteries in series (12 volts each) for emergency power and when a power failure takes place. If you are installing an optional Battery Backup (SK-BCAB/B), make certain that there is adequate room for its installation.

  • Page 30: System Ground

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual System Ground It is strongly recommended that the system be grounded by connecting a heavy, insulated copper wire (e.g., 14AWG or larger) between the grounding bolt on the right-lower side of the cabinet and an earth ground.
  • Page 31 TransTel Model TD-824-I Digital Telephone System – System Installation CAUTION!: Avoid shorting Tip and Ring together. It may damage the TD-MBU or TD-STC board. • Connections to telephones are made pins 2 & 3 and pins 1 & 4. •...

  • Page 32: Access Control Phone (Acp) And Digital Doorphone Unit (Ddu)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Access Control Phone (ACP) and Digital Doorphone Unit (DDU) • Single Pair Wiring is required for connection to ACP/DDU phone. • ACP/DDU Phone can be used on a digital pair with another ACP/DDU or a DK-1 telephone set.

  • Page 33: Single Line Telephone

    TransTel Model TD-824-I Digital Telephone System – System Installation Single Line Telephone Connections to telephones are made pins 2 & 3 (odd ports) and pins 1 & 4 (even ports). A cable cover is provided with the KSU. Station cables can enter from either the top or bottom as desired.

  • Page 34: Analog Door Phone Connection

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Analog Door Phone Connection One Door phone may be connected to the TD-824 system and only with SLC-8 cards.. A cable cover is provided with the KSU. Door phone cable can enter from either the top or bottom as desired.

  • Page 35: Co/Pabx Connections

    TransTel Model TD-824-I Digital Telephone System – System Installation CO/PABX Connections Make your CO line connection to the telephone company on this connector. Pins 3 and 4 of the connector are for the CO line. RJ-11C (2 wire) modular connector is required.

  • Page 36: Music On Hold Connection

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Music on Hold Connection • Connect the (optional) external music source to the external Music" input labeled on the KSU. • Use a 1/8” mini plug to connect the music source to the KSU.

  • Page 37: Power On And Operational Test

    TransTel Model TD-824-I Digital Telephone System – System Installation Power On and Operational Test Before connecting the TD-PWU to AC power: • Verify that input voltage and input voltage selection jumper on TD-PWU are correct before you power up the system.

  • Page 38: Series Model Td-824I - Programming Forms Manual

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Series Model TD-824i - Programming Forms Manual Programming Information This document contains the system forms required to program the TD-824i and an explanation of the parameters.
  • Page 39 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Basic Programming Commands: For the first time or infrequent installer, a programming overlay is provided with each Key Service Unit. This overlay, when placed on a TransTel LCD telephone set indicates keys used during programming for easy reference.

  • Page 40: Alphanumeric Entry

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Alphanumeric Entry: The following table indicates the capabilities of the name programming functions if they are selected on the system. System Speed Dial, Personal Speed Dial, Stations, CO Lines and Sensors may be programmed with names.

  • Page 41: Form 01 - Day Ringing And Ringing Line Preference Assignment

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 01 - Day Ringing and Ringing Line Preference Assignment Ring Type : Linear / Circular / Hunt / Private / Common (See Form 35-CO-07) (Line 1) 01-01- Extension (Line 2) 01-02-...

  • Page 42: Form 02 - Night Ringing And Ringing Line Preference Assignment

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 02 - Night Ringing and Ringing Line Preference Assignment Ring Type : Linear / Circular / Hunt / Private / Common (See Form 35-CO-08)

  • Page 43: Form 03 - Door Phone Ringing Assignment Form

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 03 - Door Phone Ringing Assignment Form 03 – 01 - Extension General: This program assigns the door phone to ring the programmed stations. If the only entry on form 03-01-01 is 99, then all phones will ring.

  • Page 44: Form 04 - Console Assignment Form

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 04 - Console Assignment Form Console Group 01 Console Group 04 – 01 - 04 – 02 - Extension Extension Console Group Console Group 04 –...

  • Page 45: Form 05-01 - System Parameters Form - Timers-1

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-a20m G1-a20t Form 05-01 - System Parameters Form - Timers-1 Form 05-01- Range of Entries Default Value Item Valid Description Default Settings 05-01-01 Hold Recall Time 1=60 Sec 05-01-02 Exclusive Hold Recall Time...
  • Page 46 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual G1-a20m 05-01-04. DISA Access Delay Day Service: This parameter sets the time duration that a DISA trunk will ring prior to connection to return dial tone or VSC message.

  • Page 47: Form 05-02 - System Parameters Form - Timers-2

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 05-02 - System Parameters Form - Timers-2 Form 05-02- Item Range Of Entries Default 05-02-01. SLT Dial Tone Timeout: This parameter is for Single Line Telephones. If a key is not pressed before the assigned time period expires when Dial Tone is given, a Busy Tone will be heard and the DTMF receiver will be released.
  • Page 48 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 02-05 Continued 05-02 05 - Key Telephone Flash Timer (ms. = milliseconds): This parameter permits the selection of Flash time for Key stations when pressing the [TRF/FL] key or an analog phone which presses flash and then dials 800 while connected to an outside line.

  • Page 49: Form 05-03 - System Parameters Form - Codes-1

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 05-03 - System Parameters Form - Codes-1 Form 05-03- Code Range Of Entries 0 - 1 0 - 1 0 - 1 0 - 9 0 - 9 2 - 4...
  • Page 50 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 05-03 Continued 05-03-06 - Station Number Digit Length: This assigns the number of digits used for the station numbering plan. 2, 3, or 4 digits may be used. In the...

  • Page 51: Form 05-04 - System Parameters Form - Codes-2

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-a20u Form 05-04 - System Parameters Form - Codes-2 Form 05-04- Item Range of Entries 0 - 1 0 - 2 0 - 1 0 - 4 0 - 1...
  • Page 52 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual 05-04-06 - Speed Dial Distribution: This parameter sets the number of speed dial numbers allocated to the system speed dial. Adding extra numbers to system Speed Dial reduces the number of personal Speed Dial numbers available to share between individual stations Numbers after backslash indicate sets available with name feature enabled.

  • Page 53: Form 05-05 - System Parameters Form - Codes-3

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 05-05 - System Parameters Form - Codes-3 Form 05-05- Item Range of Entries 0 - 1 0 - 6 0 - 9 0 - 9 0 - 9 Default 05-05-01 –...
  • Page 54 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 05-05 Continued 05-05-05 - Name Function: This parameter enables the naming feature for trunks, extensions and speed dials. Features \ Values Display Name instead of number...

  • Page 55: Form 05-06 - System Parameters Form - Timer/Codes

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 05-06 - System Parameters Form - Timer/Codes Form 05-06- Item Range Of Entries 0 - 9 0 - 9 0 - 1 0 - 1 0, 1, 3 Default...
  • Page 56 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 05-06 Continued 05-06-06 -CO Disconnect Timer for ECF, Unsupervised Conference, and DISA: This parameter sets the time that the system will allow an Unsupervised Conference or External Call Forward to continue before sending a warning tone to the parties and then disconnecting the call.

  • Page 57: Form 05-07 - System Parameters Form - Timer/Codes

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-a20u Form 05-07 - System Parameters Form - Timer/Codes Form 05-07- Item Range of Entries 0 - 1 0 - 1 0 - 1 0 - 7 0 - 9...
  • Page 58 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual 05-07- 04 - DISA Operator Recall Capability (No Digits Dialed): Setting Situation No dialing after the first The VSU has The VSU has already voice announcement...

  • Page 59: Form 05-08 - System Parameters Form - Timer/Codes

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 05-08 - System Parameters Form - Timer/Codes Form 05-08-T Item Range of Entries 0 - 9 0 - 1 0 - 9 0 - 1 0 - 8 0 - 9 Default 05-08-01 –...
  • Page 60 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 05-08 Continued 05-08-05 - SLT Feature Programming Access Code First Digit: This feature changes the programming digit used by an Analogue phone to perform its programmable features.

  • Page 61: Form 05-09 - System Parameters Form - Misc

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-a10ax Form 05-09 - System Parameters Form - Misc. Form 05-09-T ITem Range of Entries 0 - 1 Default 05-09-01 Reserved: 05-09-02 – Console Automatic Queuing: This feature enables the busy console(s) to have an intercom call(s) queued to it(them). If the station dials the operator (by 0 or 9) and all the consoles are busy, the system will put this call in the queue to wait for the operators to be free.
  • Page 62 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 05-09 Continued 05-09-06 - UCD Enable Time: This parameter is to set the time duration before the system answers an incoming call when the ring assigned station(s) are busy, if a VSC card is installed.

  • Page 63: Form 05-10 - Voice Mail Leading Digits

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-A10n G1-A20o Form 05-10 - Voice Mail Leading Digits Form 05-10-T Range of Entries Default Description This parameter allows the system to insert digits before the call forwarded station number when the call forward is received by the voice mail port if Standard Protocol is selected.

  • Page 64: Answering Machine Operation

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual If the Incoming trunk indentifier is enabled in the TD-824i on Form 05-12-05 the dial string will be 7+ a two digit trunk number, so an identifier for trunk 1 will be 701, trunk 2 is 702 and so on.

  • Page 65: Form 05-11 - System Parameters Form - Supplemental

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-a10ao Form 05-11 - System Parameters Form – Supplemental Form 05-11-T Item Range Of Entries Default G1-a10a0 05-11-01 – Caller ID Ignore Header Digit: This option is enabled for locations where a non-numeric character precedes the Caller ID information.
  • Page 66 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual 05-11-05 - DISA Digit Acceptance: This parameter sets which of the system functions are accessible by DISA callers 0=All special digits allowed 1=[*],[#] Allowed - [8],[9] Disallowed...

  • Page 67: Form 05-12 - System Parameters Form - Miscellaneous

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-a10h G1-a20u Form 05-12 - System Parameters Form - Miscellaneous Form 05-12-T Item Range Of Entries 0 - 4 Default G1-a20u 05-12-01 – TRF/FL Key Operation: If set to 0, transfer procedure requires that the TRF/FL 0=TRF/FL is pressed to transfer a call to a station.
  • Page 68 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual 05-12-06 Trunk Group Access Type: If this parameter is set to 0 then line selection will be the first available trunk in the users dial (9-0) group. If the parameter is set to 1 then the lines will be selected in a Circular fashion till all lines have been used and then the selection will start again.

  • Page 69: Form 05-13 - System Parameters Form - Miscellaneous

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-a10aw Form 05-13 - System Parameters Form - Miscellaneous Form 05-13-T Item Range Of Entries 0 - 4 Default 05-13-01. Intercom Hot Key Dialing: This parameter when enabled allows stations to dial an intercom call On Hook without having to lift the handset or press the SPK key.

  • Page 70: Form 05-14 - System Parameters Form - Miscellaneous

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 05-14 - System Parameters Form – Miscellaneous Form 05-14-T Item Range Of Entries 0 -1 Default 05-14-01 – ISDN PLL Maintenance: This parameter controls the function of the internal phase locked loop, used for ISDN trunking.

  • Page 71: Form 06-01 - Relay Assignment Form

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-10a6 Form 06-01 - Relay Assignment Form: TD-MSC card has 1 dry contact relay. No voltage is provided by the system, the installer will have to provide their own source to suit the application.
  • Page 72 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Includes all versions through G1-a20x Page 72 Version 1.3b October 2005...

  • Page 73: Dk-2 Key Layout

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual DK-2 Key Layout Note: Keys 1 through 29 are programmable. Keys 30 – 34 are not currently usable on the TD-824i Page 73...

  • Page 74: Key Layout

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual DK-3 Key Layout Note: Keys 31 – 32 are not currently usable on the TD-824i. Includes all versions through G1-a20x Page 74 Version 1.3b October 2005...

  • Page 75: Form 07 - Flexible Key Group Assignment

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 07 - Flexible Key Group Assignment: 07 - Group 01 07 - Group 02 Function Function Function Function 07 - Group 03 07 - Group 04 Function Function Function...
  • Page 76 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 07 - Flexible Key Group Assignment: 07 - Group 05 07 - Group 06 Function Function Function Function 07 - Group 07 07 - Group 08...

  • Page 77: Form 07 - Key Assignment Parameters

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 07 Continued General: This program assigns 8 groups of Flexible key plans for Key phones. Each Key phone can be assigned to use two groups (Mode 41-st-(02 & 03)).

  • Page 78: Form 08-01-Ip - Dss Key Group Assignment

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 08-01-IP - DSS Key Group Assignment: General: This program assigns 1 group of Flexible key plans for DSS Consoles. There is 1 key group available in the TD- 824i.

  • Page 79: Form 09 - System Speed Dial Assignment

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 09 - System Speed Dial Assignment: Special Characters HOLD=Pause (p) MSG=Tone (T) TRF/FL=Flash(F) MIC/AT = Change Key Toggles between Line entry, telephone number entry and name entry. Bin # 09-...
  • Page 80 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 09 Continued i) Pause : During dial procedures, the dialing will wait for a programmable period (Refer Program 05-01-06). ii) Flash : This will make a loop disconnection of a pre-assigned duration.

  • Page 81: Form 10 - Single Digit Dialing Assignment

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 10 - Single Digit Dialing Assignment : Form 10 - Single Digit Group 01 Form 10 - Single Digit Group 02 Item Item Station Station Form 10- Single Digit Group 03...

  • Page 82: Form 11 - Date And Time Settings

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 10 Continued Example 10-01-IP S.D.I. 11 13 22 00 55 In the above example an incoming DISA caller subject to Single Digit dialing group 01 who dials 1 will call station 11, dialing 2 will call station 13, 3 will call Station 22.

  • Page 83: Form 12 - System Alarm Schedule

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 12 - System Alarm Schedule: Schedule: Alarm Time Duration (24 Hour Format 00:00-23:59) (01-98 minutes) General: This program permits the assignment of 10 time schedules for alarm clock purposes.

  • Page 84: Form 13 - System Passwords

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 13 - System Passwords: d(on't care) = DSS Key 4. All other digits are entered from the station keypad. 13-01 System Programming Password Password...

  • Page 85: Form 14 - Station Message Detail Recording

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 14 - Station Message Detail Recording: Form 14 -01- Item Options 00-99 Default 14-01-01 - Recording Start Time: This parameter determines a “grace period” before call costing begins. This allows for calls that are made but unanswered.
  • Page 86 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 14 Continued 14-01-08 - Detect Polarity Reversal: If reversal is disabled, the system will start the call timer after accessing a CO line. If reversal is enabled, the system will start the call timer after the called party answers.
  • Page 87 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual CASE 6: October 2, 12:35 P.M., Station 116 made a call, which was restricted. CASE 7: Line 1 was used by station 121 for 55 seconds then put on hold. One meter pulse was recorded against this station for its section of the call.
  • Page 88 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual SMDR OUTPUT DATA FORMAT - NEW With CLI Output TK S TELEPHONE NUMBER Account MM/DD START DURATION RING UNIT 112 01 001188629645752 12345678 10/02 08:35 00:02'35"...

  • Page 89: Form 17 - Forced Account Code Assignment

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 17 - Forced Account Code Assignment: Entries less than eight digits should have "d" in all trailing locations, (e.g., 123245ddd). Actual Code Actual Code Actual Code General: This program creates 48 Forced Account codes.

  • Page 90: Form 18 - Toll Plan Assignment

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual G1-a10aw Form 18 - Toll Plan Assignment: 18-00 - ITem 18-01 - ITem 18-02 - ITem 18-03 - ITem 18-04 - ITem 18-05 - ITem...
  • Page 91 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 18 continued Toll Classes: Class Function Prog. Form Unrestricted Default Use Form 51 for the Unrestricted numbers. Use Form 61 for the Restricted numbers Form 51,61 Use Form 52 for the Unrestricted numbers. Use Form 62 for the Restricted numbers Form 52,62 Use Form 53 for the Unrestricted numbers.

  • Page 92: Form 19 - Voice Service Unit Channel Assignment

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 19 - Voice Service Unit Channel Assignment: Channel/Item Function Number Channel/Item Function Number 19-01 19-05 19-02 19-06 19-03 19-07 19-04 19-08 19-01 - 19-08=Channel Assignments...
  • Page 93 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual The 2 in brackets indicate that the second message segment is ready to record. Dial 0 and record the message to apologize for the continuing delay, VOICE PORT (1) RECORDING....

  • Page 94: Form 20 - Day/Lunch/Night Service Switching Schedule

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 20 - Day/Lunch/Night Service Switching Schedule: This program assigns daytime from Sunday to Saturday for automatic night switching and sets lunchtime to allow the VSU to play a different message for this period. All times must be in 24 hour format.

  • Page 95: Form 25 - Reset Data To System Default

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 25 - Reset Data to System Default: This program resets all data to System Default. All new systems must be reset to default before any programming in case corruption has been caused during handling or shipping. When using item 3 or 4 these must be done AFTER the system reset is performed.

  • Page 96: Form 29 - Co Line Specifications #1

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 29 - CO Line Specifications #1: Line Data 29-01 Line 01 29-02 Line 02 29-03 Line 03 29-04 Line 04 29-05 Line 05 29-06 Line 06...
  • Page 97 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual 29-xx-05 – Incoming Call Connect: This feature allows either some or all stations which are ring assigned in Mode 01 or 02 to receive the audible ring signal when a trunk rings at the station. If the audible signal is disabled the station will still be able to answer...

  • Page 98: Form 35 - Co Line Specifications

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 35 - CO Line Specifications: Line Data Line 01 Line 02 Line 03 Line 04 Line 05 Line 06 Line 07 Line 08 Range...
  • Page 99 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 35 Continued 35-xx-05 - Line Pick Up Enable (Allows a non-ringing station to answer an incoming call): Enable = An incoming call on this line can be answered by non-ringing stations.

  • Page 100: Form 36 - Co Line Groups (Dial 9 Groups)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 36 - CO Line Groups (Dial 9 Groups): Line - 36 01 36-02 36-03 36-04 36-05 36-06 36-07 36-08 General: This program permits each trunk line to be assigned to different Trunk groups. There are eight groups in total.

  • Page 101: Form 38 - Alternate Co Line Groups (Dial 87 Groups)

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 38 - Alternate CO Line Groups (Dial 87 Groups): This program permits each line to be assigned to different Trunk groups which can be accessed by dialing [87]. There are 8 groups in total. This group will be available to a station in addition to it's dial 9 group. Always set outgoing calls to start from the highest installed trunk and program in descending order to the lowest trunk equipped.

  • Page 102: Form 39-00 - Sensor Assignment Form - Ksu Sensor Only

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 39-00 - Sensor Assignment Form – KSU Sensor only: The SENSOR type may be normally open or normally closed and can be set to be activated in Day or Night switching or in both.

  • Page 103: Form 39-St Sensor Assignment Form - Acp And Doorphone Units

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-a10aq Form 39-st Sensor Assignment Form – ACP and Doorphone Units: The SENSOR type may be normally open or normally closed Form 39-st- Name - (Reference Only – Not programmed in...

  • Page 104: Form 40 - Station Class Of Service (Part 1)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 40 - Station Class of Service (Part 1): Valid Item Settings Description Default 40-st-01 0-9,d Override/OHCA Level 1=Low 40-st-02 Monitor Level 1=Low 40-st-03 Limit Call Duration...
  • Page 105 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual 40-STN-07- Station Lock/Unlock Status: If a phone becomes locked accidentally or the user forgets their lock code, this parameter will unlock the phone. There is no way of finding what the lock code was.

  • Page 106: Form 41 - Station Specifications

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 41 - Station Specifications Valid Item Settings Description Default 41-st-01 Station Group / Agent Group for UCD 41-st-02 Key Group For KeyPhone 41-st-03 Shift Key Group For KeyPhone...
  • Page 107 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual 41-STN-07 - Port Number: This is for checking only, the system will This parameter is not user programmable automatically show the correct port number. It is not possible for the user to change or remove this parameter.

  • Page 108: Form 42 - Personal Speed Dial Table Assignment

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 42 - Personal Speed Dial Table Assignment: Default Numerical -01 DSS -02 Default Numerical -01 DSS -02 42-___- 42-___- 42-___- 42-___- 42-___- 42-___- 42-___-...
  • Page 109 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual If problems are encountered with stations not being able to program speed dial numbers, check this parameter to be sure that speed dial locations are available to the station. If the station card was installed at the time of system initialization then the blocks will have been allocated automatically.

  • Page 110: Form 43 - Port Assignments

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 43 - Port Assignments: Station Card #1 (Ports 11 – 18) Name (Optional) 43-11- 43-12- 43-13- 43-14- 43-15- 43-16- 43-17- 43-18- Station Card #2 (Ports 21 – 28)
  • Page 111 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 43-port-02 – Equipment Type: (Recognized by the system Automatically) 0=No Equipment Connected 1=Digital Telephone without LCD 2=Digital Telephone with LCD 3=Hybrid function for Digital Phone with SLT adapter installed...

  • Page 112: Form 44 - Station Class Of Service (Part 2)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual G1-a10as Form 44 - Station Class of Service (Part 2): Station Card #1 44-EXT-- 44-_____ 44-_____ 44-_____ 44-_____ 44-_____ 44-_____ 44-_____ 44-_____ Default Station Card #2...
  • Page 113 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 44 continued 44-ext-01 – System Alarm Station: If disabled, the station will not receive system alarm clock signals 0=Enable 1=Disable 0=Hold is allowed 1=Hold is not allowed 44-ext-02 – Call Hold:...

  • Page 114: Form 45 - Station Class Of Service (Part 3)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 45 - Station Class of Service (Part 3): Station Card #1 45-STN-- 45-_____ 45-_____ 45-_____ 45-_____ 45-_____ 45-_____ 45-_____ 45-_____ Default Station Card #2...
  • Page 115 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 45 Continued 45-ext-01 - Intercom Dialing Restriction: If this setting is enabled, the station can not make an intercom call by dialing a station number. Under this condition, the Key Phone still can press a Flexible Key to make an intercom call or the Key Station or Analogue phones can call a station using the "Single Digit"...

  • Page 116: Form 46 - Station Class Of Service (Part 4)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual G1-a10av Form 46 - Station Class of Service (Part 4): Station Card #1 46-STN-- 46-_____ 46-_____ 46-_____ 46-_____ 46-_____ 46-_____ 46-_____ 46-_____ Default Station Card #2...
  • Page 117 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 46 continued 46-ext-01 - Dial 87 Line Group: If this setting is from 1 to 8, after the station dials [87], the system will automatically search for a free line which is assigned in group 1 to 8 in Program Form 38.
  • Page 118 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual 46-ext-05 - Maximum Transfer Times: This feature allows the user or the automatic attendant console to re-transfer the same call for the number of times set in this parameter.

  • Page 119: Form 47 - Hot Line Table

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 47 - Hot Line Table: SPD? (Y/N) Location (Number) SPD? (Y/N) Location (Number) This feature allows a user to lift the handset and directly call a specific outside party through System Speed Dial or an Intercom Extension without dialing any digits.

  • Page 120: Form 50 - Station Class Of Service (Part 5)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 50 - Station Class of Service (Part 5): Station Card #1 50-STN-- 50-_____ 50-_____ 50-_____ 50-_____ 50-_____ 50-_____ 50-_____ 50-_____ Default Station Card #2...
  • Page 121 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual G1-a10ar 50-ext-01 – Digital Doorphone/ACP Intrusion Alarm: When enabled, this parameter will cause an alarm condition on all stations if the ACP is disconnected or is opened. Dial [777] from a system console to stop this alarm.

  • Page 122: Prog. Form

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Toll Control Forms Forms 51 through 56 set exceptions (allow) to rules defined in corresponding forms 61 through 66. Form 51 & 61 correspond to toll class setting 1 as per Form 18 of the Td-824i. Forms 52 & 62 correspond to toll class setting 2, through forms 56 &...

  • Page 123: Form 51 - Exception (Allow) Tables

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 51 - Exception (Allow) Tables: Form 61 - Deny Tables: Entry Entry Actual Entry (Up to 12 digits in Length) Actual Entry (Up to 12 digits in Length) Number...

  • Page 124: Form 52 - Exception (Allow) Tables

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 52 - Exception (Allow) Tables: Form 62 - Deny Tables: Entry Entry Actual Entry (Up to 12 digits in Length) Actual Entry (Up to 12 digits in Length)

  • Page 125: Form 53 - Exception (Allow) Tables

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 53 - Exception (Allow) Tables: Form 63 - Deny Tables: Entry Entry Actual Entry (Up to 12 digits in Length) Actual Entry (Up to 12 digits in Length) Number...

  • Page 126: Form 54 - Exception (Allow) Tables

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 54 - Exception (Allow) Tables: Form 64 - Deny Tables: Entry Entry Actual Entry (Up to 12 digits in Length) Actual Entry (Up to 12 digits in Length)

  • Page 127: Form 55 - Exception (Allow) Tables

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 55 - Exception (Allow) Tables: Form 65 - Deny Tables: Entry Entry Actual Entry (Up to 12 digits in Length) Actual Entry (Up to 12 digits in Length) Number...

  • Page 128: Form 56 - Exception (Allow) Tables

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 56 - Exception (Allow) Tables: Form 66 - Deny Tables: Entry Entry Actual Entry (Up to 12 digits in Length) Actual Entry (Up to 12 digits in Length)

  • Page 129: Form 57 - Exception (Allow) Tables

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 57 - Exception (Allow) Tables: Form 58 - Exception (Allow) Tables: Entry Entry Actual Entry (Up to 12 digits in Length) Actual Entry (Up to 12 digits in Length)

  • Page 130: Form 59 - Exception (Allow) Tables

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 59 - Exception (Allow) Tables: Entry Entry Actual Entry (Up to 12 digits in Length) Actual Entry (Up to 12 digits in Length) Number...

  • Page 131: Form 67 - Hunt Group Pilot Assignment

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 67 - Hunt Group Pilot Assignment: 67-grp Group Pilot Hunt Group Pilot Hunt Num. Number Type Num. Number Type General: This program sets Pilot Numbers for Hunting Groups 1 to 10.

  • Page 132: Form 68 - Day Hunt Group Assignments

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 68 - Day Hunt group assignments: Group Number Member Member Member Member Member Group 01 Group 02 Group 03 Group 04 Group 05 Group 06...

  • Page 133: Form 69 - Night Hunt Group Assignments

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 69 - Night Hunt group assignments: Group Number Member Member Member Member Member Group 01 Group 02 Group 03 Group 04 Group 05 Group 06 Group 07 Group 08...

  • Page 134: Form 70-Cd - Isdn Interface Specifications Program

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 70-Cd - ISDN Interface Specifications Program: IDSN=01 ISDN=02 ISDN=03 Cd=01 (Default=1) Cd=02 (Default=0) Cd=03 (Default=1) Cd=04 (Default=0) General: Assigns the ISDN interface to either “S” interface or “T” interface.

  • Page 135: Form 71-Tk - Isdn Line Number Assignment Program

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 71-tk - ISDN Line Number Assignment Program: This form allows you to assign an identifying number to each B Channel of an ISDN line. Tk 01 and 02 correspond to ISDN circuit #1. Tk 03 and 04 correspond to ISDN circuit #2. Tk 05 and 06 correspond to ISDN circuit #3.

  • Page 136: Form 74 - Least Cost Routing - Digit String Analysis Table

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 74 - Least Cost Routing - Digit String Analysis Table: Numbers entered here are used for routing analysis. Up to 10 digits may be analyzed...

  • Page 137: Form 74 - Least Cost Routing - Digit String Analysis Table

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 74 - Least Cost Routing - Digit String Analysis Table: Numbers entered here are used for routing analysis. Up to 10 digits may be analyzed Item numbers range from 001 through 500...

  • Page 138: Form 76 - Least Cost Routing - Routing Table Normal Operation

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 76 - Least Cost Routing - Routing Table Normal Operation: This form determines the 20 Routing Tables that will be used during normal operation...

  • Page 139: Form 76 - Least Cost Routing - Routing Table Special Day Rate

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 76 - Least Cost Routing - Routing Table Special Day Rate: This form determines the 20 Routing Tables that will be used during Special Day Rate (05-13-07) Operation Modify...

  • Page 140: Form 76 - Least Cost Routing - Routing Table Second Special Rate Day Operation

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 76 - Least Cost Routing - Routing Table Second Special Rate Day Operation: This form determines the 20 Routing Tables that will be used during normal operation...

  • Page 141: Form 77-Num - Least Cost Routing - Modify Digits Table

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 77-num - Least Cost Routing - Modify Digits Table: System will delete the first nn digits (from 01 – 10) and then added the assigned digits in the front of the dialed numbers.

  • Page 142: Form 77-Num - Least Cost Routing - Modify Digits Table (Continued)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 77-num – Least Cost Routing – Modify Digits Table (continued): Entry Digits to Digits to Insert Entry Digits to Digits to Insert delete (Up to 10 digits)
  • Page 143 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Example 2: A customer has local lines and a Foreign Exchange (FX) into a town just across the state line (and in another area code). He wants to make sure calls to the other town always go over the FX.

  • Page 144: Form 78 - Station Class Of Service (Part 6)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual G1-a20u Form 78 - Station Class of Service (Part 6): Station Card #1 78-STN-- 78-_____ 78-_____ 78-_____ 78-_____ 78-_____ 78-_____ 78-_____ 78-_____ Default Station Card #2...
  • Page 145 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 78 - continued Description: Form 78-ext-01 - Least Cost Routing Access Level: This parameter assigns the LCR routing level for each station. 1 = Allow this station to use the 1...
  • Page 146 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 78-ext-06 – Reserved: G1-a20u Form 78-ext-07 – Auto Connect to Ringing Line: When set to 0 (Default) a station that is ringing on an incoming CO trunk is automatically connected to the station when the handset is lifted or the SPKR button is pressed.

  • Page 147: Caller Id And Redial Patterns

    In most areas, local calls are a 7 digit number, which consist of the 7 right-most digits. The Area Code (the first NXX) is not used. TransTel Communications, telephone number is Area Code 561, the Office Code is 747 and our Subscriber Number is 4466.

  • Page 148: Local Toll (7 Digit)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual 2. Local Toll (7 digit) Some localities (a good example is the state of Maine, in the northeastern U.S.) allows 7 digit dialing to the entire state, even though some calls are billed at toll rates.

  • Page 149: Local Toll (1 + 10 Digit)

    561 area code. However, if I receive a call at TransTel Communications and it has the Caller ID of 561-994-2345, to redial it, I must dial 1 + 561 + 994 + 2345. It is not a local office code, but it is within the 561 area code.

  • Page 150: Form 83 - Caller Id Block Assignment

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 83 - Caller ID Block Assignment: This program divides Caller ID blocks for use by Stations. The number of memory buffers per block are assigned on Form 05-13-03.

  • Page 151: Form 84-01 - Home Area Code

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 84-01 – Home Area Code: This is the area code where your own telephone numbers terminate. It is the area code portion of your phone number. It is 3 digits in length.

  • Page 152: Form 86-Nnn - Office Code Pattern 300-399

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 86-nnn – Office Code Pattern 300—399: This form assigns proper redial pattern to each office code (only within your own area code). This is designed to provide you with the ability to differentiate between 7 digit dialing (local calls) and other calls within your own area code.

  • Page 153: Form 86-Nnn - Office Code Pattern 400-499

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 86-nnn – Office Code Pattern 400—499: This form assigns proper redial pattern to each office code (only within your own area code). This is designed to provide you with the ability to differentiate between 7 digit dialing (local calls) and other calls within your own area code.

  • Page 154: Form 86-Nnn - Office Code Pattern 500-599

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 86-nnn – Office Code Pattern 500—599: This form assigns proper redial pattern to each office code (only within your own area code). This is designed to provide you with the ability to differentiate between 7 digit dialing (local calls) and other calls within your own area code.

  • Page 155: Form 86-Nnn - Office Code Pattern 600-699

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 86-nnn – Office Code Pattern 600—699: This form assigns proper redial pattern to each office code (only within your own area code). This is designed to provide you with the ability to differentiate between 7 digit dialing (local calls) and other calls within your own area code.

  • Page 156: Form 86-Nnn - Office Code Pattern 700-799

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 86-nnn – Office Code Pattern 700—799: This form assigns proper redial pattern to each office code (only within your own area code). This is designed to provide you with the ability to differentiate between 7 digit dialing (local calls) and other calls within your own area code.

  • Page 157: Form 86-Nnn - Office Code Pattern 800-899

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Form 86-nnn – Office Code Pattern 800—899: This form assigns proper redial pattern to each office code (only within your own area code). This is designed to provide you with the ability to differentiate between 7 digit dialing (local calls) and other calls within your own area code.

  • Page 158: Form 86-Nnn - Office Code Pattern 900-999

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Form 86-nnn – Office Code Pattern 900—999: This form assigns proper redial pattern to each office code (only within your own area code). This is designed to provide you with the ability to differentiate between 7 digit dialing (local calls) and other calls within your own area code.

  • Page 159: Programming Cross Reference

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Programming Cross Reference By Application: Incoming Calls: INGING SSIGNMENT 01-tk-stn Day Ringing And Ringing Line Preference Assignment 02-tk-stn Night Ringing And Ringing Line Preference Assignment 05-01-05 Busy Reminder Tone Interval (Off-Hook Ringing/Camp-On)

  • Page 160: Intercom Calls

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual PEED 05-01-06 Pause Duration for Speed Dial pauses 05-03-02 Automatic Trunk Search During Speed Dial, Auto Redial, Saved Redial, etc. 05-04-06 Speed Dial Distribution 05-05-03/04...

  • Page 161: Busy/During Conversation

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Busy/During Conversation: OLD AND ECALL 05-01-01 Hold Recall Timer (Time until station is warned of hold call) 05-01-02 Exclusive Hold Recall Timer (Same operation as hold recall) 05-01-03 Hold Recall Time out (Time before call is rerouted to Operator - After Hold Recall Timer has expired.)

  • Page 162: Night Service

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Night Service: Night Ringing And Ringing Line Preference Assignment 09-spd-nn System Speed Dial 101~109 for ECF 20-nn Day/Night Service Schedule 35-tk-03 External Call Forward Location (Speed Dial Assignment)

  • Page 163: System Clock

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual 13-04 Password for Monitoring over DISA (defaulr=none) TATION NLOCK 40-stn-07 Station Lock/Unlock Status USY OUT A TRUNK 37-tk-x Taking a trunk out of service NTERCOM IALING RESTRICTIONS 45-stn-01 Restrict station to station intercom dialing...

  • Page 164: Optional Services

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual AGING 07-grp-key Paging key 40-stn-05 Station Paging Access Deny/Allow 40-stn-06 Receive Page Over Speaker Deny/Allow 41-stn-01 Station Page Group Optional Services: & D OOR PHONE...

  • Page 165: Voice Mail

    TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual Voice Mail: 05-12-05 Set Voice Mail integration type 43-prt-02 Set equipment type for Voice Mail Port 35-trk-07 Set ring type (day) 35-trk-08 Set ring type (night) 67-grp Set Hunt group Pilot number and hunt type for VM...

  • Page 166: By Program Type In Alphabetical Order

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual By Program Type in Alphabetical Order: System Parameters: 12/24 Hours Clock 05-04-04 ACD - 1 Enable Time 05-09-06 ACD - 1 Release Time 05-09-08 ACD - 1 Segment 2 Recall Time...
  • Page 167 TransTel Model TD-824-I Digital Telephone System – Programming Forms Manual ISDN interface specifications 70-CD ISDN line number assignment 71-CH Least cost routing (analysis table) 75-NUM Least cost routing (modifying table) 77-NUM Least cost routing (routing table) 76-NUM Least cost Routing – Weekly Holiday 05-13-07 Least cost Routing –...
  • Page 168 TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual ACP Encode key card ACP Register key card Alarm signaling type 44-ST-08 Allow Trunk Access 45-ST-04 Allow Unrestricted Speed Dial Access 45-ST-07 Associated loud bell...

  • Page 169: Transtel Key Telephone Operation Manual

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual TransTel Key Telephone Operation Manual. Introduction This section is devoted to an explanation of the implementation and operation of TransTel electronic telephones (keysets). Included are normal functions that are available to most station users and functions that are available only to console operators.

  • Page 170: Answering Calls

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Answering Calls There are several ways that you may answer calls at Your telephone. Depending on the particular type of call and the system programming, calls may require different actions in order to answer them.

  • Page 171: Answering A Doorphone

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual External Calls Not Ringing At Your Set Calls With CO Line Appearance: Incoming calls on a line that appears on your set may be picked up by pressing the flashing CO line key. You will be connected to the call.

  • Page 172: Automatic Last Number Redial

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual To respond to a Callback: 1. If you are on a conversation and a callback has been left on your telephone and you have an LCD display it will indicate in the lower portion of the LCD: MSG ST:XX Also, your Message key will flash.

  • Page 173: Background Music

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Press SAVE. Your Display (if you have one) will show “Auto Save.” Hang up. You may make 1 or a hundred calls (or more if you need to…) in between.

  • Page 174: Call Forwarding

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Delete Caller ID Record: 1. While reviewing a Caller ID record, you may delete it by pressing the [TSF] key. To exit Caller ID Review Mode: 1.

  • Page 175: Call Forward All Stations (Operator Function)

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual To forward calls when you don’t answer or are busy: Press PGM. Enter CFD Dial the extension number where you want to forward your calls. Enter 3 for No Answer / Busy Conditions.

  • Page 176: Call Swap

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual IRECT XTENSION ICKUP This allows you to answer a specific station that is ringing. Lift the handset or press SPKR. Press the * key on the dial pad.

  • Page 177: Call Waiting (Camp On)

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Dial the station number where the call needs to go. Wait for the station to answer. Press TRF/FL or hang up (depending on programming). The call has been successfully transferred.

  • Page 178: Conversation Monitor

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Conversation monitor If you need to monitor a conversation for any reason, this feature will let you observe an existing conversation. Please be aware that this option is a level controlled option (from system programming), so you may be able to override no phones, a few phones or all phones, depending on your telephone’s access level.

  • Page 179: Dialing Operator

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Select the directory that you want to utilize by pressing either [1], or [2]. Note: Depending on how your system is programmed, steps 2 and 3 may not appear.

  • Page 180: Feature Menu

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Press HOLD HOLD (that’s pressing HOLD twice). The call is placed on Exclusive Hold for your extension. You can alternate between Exclusive Hold and System Hold with each press of the HOLD key.

  • Page 181: Group Listen

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Group Listen Added in G1-a20u. For DK2 sets (s/w version 22 and newer) and DK3 sets (s/w version 15 and newer), Group Listen may be selected. This function keeps the handset operational and also activates the speaker.

  • Page 182: Immediate Co Line Access

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Immediate CO Line Access Immediate Line Access will connect you to the first available line in your Dial 9 Group when you lift the handset while in an idle state.

  • Page 183: Mute

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Mute Use the mute function any time you don’t want the outside party to hear what you are saying. While you are on the handset: Press MIC/AT key. The microphone on the handset will be muted. The LED on the MIC/AT button will flash rapidly.

  • Page 184: Pulse To Tone Conversion

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual All Paging Lift the handset or press SPKR. Press # and 0. Pulse To Tone Conversion This feature is of use to you if you are located in an area where your telephone company does not accept DTMF (Touch Tone),This feature lets you dial DTMF (Touch-Tone) for services such as remote voice mail, bank by phone, etc.

  • Page 185: Saved Number Redial (Supersave)

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Saved Number Redial (SuperSave) You are on an outside call and you need to save a number for dialing later. Supersave provides a way for you to save the number to your telephone set so that you can dial it later.

  • Page 186: Speed Dial Programming (Operator)

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Programming Personal Numeric Speed Dial Press PGM Press SPD. Press the number that you want to program (0-9). (If you want the speed dial number to access a specific telephone line every time it places the call, Press the MIC button and dial 0 plus the line number.

  • Page 187: Station Lock / Unlock

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Station Lock / Unlock This feature lets you lock your telephone so that no one can make unauthorized telephone calls on it. In order to unlock your telephone, you must remember the 3 digit long “password” that you enter when you lock it. You will need this to unlock your telephone.

  • Page 188: Timed Reminder Or Wake Up

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Timed Reminder or Wake Up With this feature, you can set an appointment reminder, that will alert you only once, or you can set a daily reminder that will happen every day at the same time (like when it’s time to stop working and go home).

  • Page 189: Voice Service Unit (Operator Function)

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Voice Service Unit (Operator Function) The Voice Service Unit has up to 8 channels on which you can record up to 8 different messages. The actual number of messages that you record will be determined by how your system is programmed. This section explains how to record and playback the messages so that the system can use them.

  • Page 190: Voice Mail Live Call Recording

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Voice Mail Live Call Recording Live Call Recording allows you to record a conversation directly into your mailbox for retrieval at a later time. During a Conversation: 1.

  • Page 191: Volume Levels Programming (Permanent)

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Volume Levels Programming (Permanent) You can permanently set the volume levels on your telephone. Press PGM. Press 6. Dial 1 to set Ringing Volume. Dial 2 to set Speaker Volume.

  • Page 192: Access Control Phone Operation Manual

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Access Control Phone Operation Manual Intercom (as doorphone) Operation: 1. Press to call the associated hunt group and open the door; or 2. Dial extension number, then press to call an individual extension to answer and open the door.

  • Page 193: Check Out (Lock) Acp (As Wall Mount Phone)

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Note: On invalid password or card, ACP will play busy tone for 5 sec and display will show ‘ERR’. Check out (lock) ACP (as wall mount phone) Operation: [password (3-digit)] to lock up ACP (as wall mount phone) to prevent it from use by others.

  • Page 194: Burglary Report

    TransTel Model TD-824-I Digital Telephone System - General Description - Installation - Programming Forms Manual Burglary Report When the sensor is opened, ACP will signal PC for application of warning or asking help. (Not currently available) Time Display When ACP is idle, display will show the time (’08.30’ for 8:30AM).

  • Page 195: Station Function Form 46-St-08

    TransTel Model TD-824-I Digital Telephone System – Key Telephone Operation Manual Station Function Form 46-st-08 There are three parameters under control of 46-st-08. 1. ACP Functions as: Doorphone b. Wall Mount Telephone 2. Door lock function activates the relay: in the ACP b.

Table of Contents