5. Slide the thick paper into the printer until the back edge is
level with the alignment arrows on the front manual feed slot.
6. Slide the left edge guide against the left edge of the thick
paper.
7. Press the ) paper button. The thick paper is set
automatically. When the P power light stops flashing, the
operation is complete.
Note:
Since the paper feeds through the printer from the front to the rear,
make sure there is enough space at the rear of the printer for the thick
paper to eject completely.
Loading Single Sheets of Paper into the Rear
Manual Feed Slot
Follow the steps below to load paper into the rear manual feed
slot. You can use A4 to A3+ size paper with a thickness of 0.29 to
0.48 mm.
1. Turn on the printer.
349