Advertisement
User Guide
HOA Buster
Version 2.1
_______________________
Introduction
This 'HOA Buster' antenna defeats the rules imposed upon amateur ham radio operators by using existing metal
gutters as an antenna and enables external tuners to achieve a near perfect match.
Product Overview
– 1 Top of Mast Mount
– 1 Ground rod
– 1 Eight-foot jumper wire with clips
– 1 Alpha Match with riser
Product Specifications
Frequency Coverage – 1.8MHz to 54MHz; 1.8MHz band is dependent upon length of gutter being long enough.
Power – 250 PEP SSB, 125 CW, or 25 watts digital modes
Page 1
Advertisement
Table of Contents
Related Manuals for Alpha Antenna HOA Buster
Summary of Contents for Alpha Antenna HOA Buster
- Page 1 Version 2.1 _______________________ Introduction This ‘HOA Buster’ antenna defeats the rules imposed upon amateur ham radio operators by using existing metal gutters as an antenna and enables external tuners to achieve a near perfect match. Product Overview – 1 Top of Mast Mount –...
- Page 2 Installation and Setup 1) Place the included metal 10-inch stake into the ground, 2) Slip the included mount over the stake and tighten the 4 bolts/nuts; 3) Screw the male bolt on the bottom of the Alpha Match onto the female hex nut on the mount; 4) Attach the included jumper wire to the hex nut on the bottom of the Match.
Need help?
Do you have a question about the HOA Buster and is the answer not in the manual?
Questions and answers