Miele DAW 1620 Active Operating And Installation Instructions page 6

Table of Contents

Advertisement

Warning and Safety instructions
For safety reasons, this appliance may only be used after it has
been built in.
The cooker hood must not be used in a non-stationary location
(e.g. on a ship).
Touching electrical components and tampering with electrical and
mechanical parts is highly dangerous to the user and can cause op-
erational faults.
Only open the housing as described in the instructions given in the
installation sheet and in the Cleaning and care section of this book-
let. Under no circumstances should any other parts of the housing
be opened.
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele authorised technician.
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised technician to protect the user from danger.
The lamps are a built-in component of the lighting. Replacement
lamps may only be fitted by a Miele authorised technician or by the
Miele Customer Service Department.
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply.
6

Advertisement

Table of Contents
loading

Table of Contents