Preface; Introduction; Unpacking & Checking; Warranty & Service - YOKOGAWA WU10 Series Instruction Manual

1. PREFACE

1.1 Introduction

This instruction manual provides
information for the installation and use of
the WU10/WF10 and WE10 cable. This
universal sensor cable is specified for
reliable transfer of analog signals and
especially designed to be installed in a
heavy industrial environment.
This multicore shielded cable is available in
different lengths, as a single and a dual
coax version. The shielded cable will
protect both the sensor and the analyzer
for interference from high voltages and
currents which are present on other cables
running in the same cable tray.
The WU10/WF10 and WE10 cables can be
used in an explosive atmosphere and
hazardous areas when used with
appropriate accessories and certified
sensors.
1.2 Unpacking & Checking
Upon delivery, unpack the product inspect
it to ensure that it is not damaged during
shipment. If damage is found, retain the
original packing material, and immediately
notify the carrier and the relevant local
Yokogawa Sales office.
Make sure the Model Code and Serial
Number on the product are the same as on
the packing list. Also check if option(s) that
were ordered are included and correct.
1.3 Warranty & Service
Yokogawa products are guaranteed free
from defects in workmanship and materials
under normal use and service for a period
of (typically) 12 months from the date of
shipment from the manufacturer. Individual
Sales organizations can deviate from the
typical warranty period, and the conditions
of sale relating to the original purchase
order should be consulted.
Damage caused by wear and tear,
inadequate maintenance, corrosion, or
by the effects of chemical processes is
excluded from this warranty coverage.
In the event of a warranty claim, the
defective goods should be sent (freight
paid) to the Service Department of the
relevant Yokogawa Sales office for repair
or replacement (at Yokogawa's discretion).
The following information must be included
in the letter accompanying the returned
goods:
•
Model Code and Serial Number.
•
Original Purchase Order and Date.
•
Length of time in service and
description of the process.
•
Description of the fault and
circumstances of the failure.
•
Process/environmental conditions that
may be related to the failure of the
cable.
•
Statement as to whether warranty or
non-warranty service is requested.
•
Complete shipping and billing
instructions for return of material, plus
the name and phone number of a
contact person that can be reached
for further information.
•
Clean Statement Returned goods that
have been in contact with process
fluids must be decontaminated and
disinfected prior to shipment.
Goods should carry a certificate to this
effect, for the health and safety of our
employees. Material Safety Data sheets
must be included for all components of
the process to which the cable has been
exposed.
IM 12B06W02-02EN-P
3