Setting The Color Space - Pentax K200D Operating Manual

5
Press the 4 button.
The camera returns to the [White Balance] screen.
6
Press the 4 button.
The camera is ready to take a picture with the set White Balance.
• If [7. Adjust White Balance] in the [A Custom Setting] menu is set to [Off] after
White Balance is adjusted, the adjusted values become invalid. Set [7. Adjust
White Balance] to [On] again to enable the values used previously.
• White Balance can also be manually measured in the [Adjust White Balance]
screen.

Setting the Color Space

You can set the color space to use. The default setting is [sRGB].
1 sRGB
2 AdobeRGB
Set [Color Space] in the [A Rec. Mode] menu (p.74).
Rec. Mode
RAW file format
Color Space
RAW button
Memory
Input Focal Length
Cancel
MENU
File names differ depending on the color space setting as shown below.
For sRGB
For AdobeRGB : _IGPxxxx.JPG
[xxxx] indicates the file number. This is displayed as a four-digit sequential
number. (p.213)
Sets to sRGB color space.
Sets to AdobeRGB color space.
PEF
sRGB
AdobeRGB
OK
OK
: IMGPxxxx.JPG
155
6