CTC Union IMC-1000MS-PH12 Quick Installation Manual

CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60 Zhouzi St., Neihu District, Taipei 114
Taiwan
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
To download this QIG or a more complete user manual, please visit
http://www.ctcu.com/Industrial/
© 2014 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
IMC-1000M-PH(E)12 & IMC-1000MS-PH(E)12 are Gigabit Ethernet
PoE (Power over Ethernet) managed media converters that support
conversion between electrical 10/100/1000Base-TX and optical
100/1000Base-X Ethernet. Housed in rugged DIN rail or wall
mountable enclosures, these converters are designed for harsh
environments, such as industrial networking and intelligent
transportation systems (ITS) and are also suitable for many military
and utility market applications where environmental conditions
exceed commercial product specifications.
Features
 12/24/48VDC (9.6~57VDC) redundant dual input power and built-
in very high efficient power booster
 Constant and regulated PoE output voltage at 55VDC
 IP30 rugged metal housing
 Dual rate (100/1000M) optical support
 Wide temperature range -20°C~75°C (IMC-1000M-PHE12 & IMC-
1000MS-PHE12)
 Industrial grade EMS, EMI, EN50121-4, EN61000-6-2, EN61000-6-4
Specifications
Optical Interface
 Standards: IEEE 802.3u, 802.3z
 Speed: 100/1000M
 SC connector－IMC-1000-PH(E)12
SFP slot－IMC-1000S-PH(E)12
 Multimode (500m) 50/125um, 62.5/125um
 Single mode (2km, 20km or 40km) 9/125um
 Wavelength: 1310nm (S/M or M/M)
Ethernet Interface
 Standards: IEEE802.3, 802.3u, 802.3ab
 Connector: RJ-45 (shielded)
 Auto MDI/MDI-X
 Speed: 10/100/1000Base-T (Auto)
 Duplex: Full/Half (Auto)
 Jumbo Frame: 9K bytes
 Link Fault Pass Through (LFP)
Power over Ethernet
 1 PoE Enabled port
 Supports IEEE802.3af 15.4W PoE & IEEE802.3at 30W PoE+
 Positive (VCC+) pins 1, 2; Negative (VCC-) pins 3, 6
 Data: pins 1, 2, 3, 4, 5, 6, 7, 8
www.ctcu.com
- 1 -
Quick Installation Guide
IMC-1000M-PH12, IMC-1000MS-PH12
IMC-1000M-PHE12, IMC-1000MS-PHE12
Industrial Grade Gigabit Ethernet PoE+ Managed Media
Converters
sales@ctcu.com
Specifications (cont.)
Power
 Absolute Range: 9.6VDC~57VDC
 Reverse Polarity Protection: Yes
 Dual Power Inputs: Yes
 Connector: Removable terminal block
 Consumption:
Items Total Power
Input Voltage Consumption
12VDC 34.4W
IMC-1000M-
24VDC 34.9W
PH(E)12
48VDC 35.4W
12VDC 34.2W
IMC-1000MS-
24VDC 34.7W
PH(E)12
48VDC 35.4W
Mechanical
 Water & Dust Proof: IP30 Protection
 Dimensions: 106 mm (D) x 62.5 mm (W) x 134.8 mm (H)
 Mounting: DIN-Rail, Wall Mount (Kits included)
 Weight:
655g－IMC-1000M-PH(E)12, 650g－IMC-1000MS-PH(E)12
Environmental
 Operating Temperature: -10°C~60°C－IMC-1000M(S)-PH12
-20°C~75°C－IMC-1000M(S)-PHE12
 Storage Temperature: -40°C~85°C
 Humidity: 5%~95% (Non-condensing)
Certifications
 EMC: CE
 EMI (Electromagnetic Interference): FCC, FCC Part 15 Subpart B
Class A, CE EN55022 Class A
 Railway Traffic: EN50121-4
 Immunity for Heavy Industrial Environment: EN61000-6-2
 Emission for Heavy Industrial Environment: EN61000-6-4
 EMS (Electromagnetic Susceptibility) Protection Level:
 EN61000-4-2 (ESD) Level 3, Criteria B
 EN61000-4-3 (RS) Level 3, Criteria A
 EN61000-4-4 (Burst) Level 3, Criteria A
 EN61000-4-5 (Surge) Level 3, Criteria B
 EN61000-4-6 (CS) Level 3, Criteria A
 EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m,
Criteria A
 Safety: UL60950-1 (Pending)
 Freefall: EN60068-2-32
 MTBF (MIL-HDBK-217): 410,235 hours－IMC-1000M-PH(E)12
331,689 hours－IMC-1000MS-PH(E)12
Device Power PoE Boost
Consumption Budget Efficiency
3.9W 30W 98.4%
4.5W 30W 98.7%
4.7W 30W 97.7%
3.9W 30W 99.0%
4.4W 30W 99.0%
4.7W 30W 97.7%
Shock: EN60068-2-27
●
Vibration: EN60068-2-6
●
- 2 -
V1.0