Table of Contents
Advertisement
Touch "Disconnect from the network".
4.
Connecting to the network
Press the menu button.
1 .
C o n n e c t i n g t o t h e n e t w o r k
Touch "Settings".
2.
Touch "Home Connect".
3.
Touch "Connect to network".
4.
Touch "Connect manually" or
5.
"Connect automatically".
Follow the notes in the section
6.
"Manual registration in the home network" or
"Automatic registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your oven.
The appliance must be connected to the network.
Note:
Press the Menu button.
1.
Touch "Settings".
2.
Touch "Home Connect".
3.
Touch "Connect to the app".
4.
Remote control
You can use the Home Connect app to easily access
the functions of your oven.
Notes
Operation on the appliance always has priority.
■
During this time, it is not possible to operate the
appliance using the Home Connect app.
The remote control is activated when the appliance
■
is first delivered.
If the remote control has been deactivated, only the
■
oven's operating statuses are displayed in the Home
Connect app.
The remote control is automatically activated when
■
the remote start is activated.
Press the menu button.
1.
Touch "Settings".
2.
Touch "Home Connect".
3.
Touch "Remote operation" to switch operation via
4.
the Home Connect app on or off.
Remote diagnostics
If a fault occurs, the after-sales service can use remote
diagnostics to access your appliance.
Contact the after-sales service, making sure that your
appliance is connected to the Home Connect server
and checking that the remote diagnostics service is
available in your country.
For more information and to check whether the
Note:
remote diagnostics service is available in your country,
please visit the Help & Support area of the Home
Connect website for your country: www.home-
connect.com
About data protection
When your appliance is connected for the first time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to
the Home Connect server (initial registration):
Unique appliance identification (consisting of
■
appliance codes as well as the MAC address of the
installed WiFi communication module).
Security certificate of the WiFi communication
■
module (to ensure a secure IT connection).
The current software and hardware version of your
■
domestic appliance.
Status of any previous resetting to factory settings.
■
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Ensure that the Home Connect functions can be
Note:
used only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
Home Connect
en
27
Advertisement
Table of Contents
