Screens - Sanyo VCC-XZN600P Installation Manual

How to Perform the Settings in the Menu Screens
This manual and the electronic manual which is contained in the supplied CD-ROM
describe the operations using the buttons on the camera.
The optional camera control unit (VAC-70) can be used to perform same operations as the
camera.
For details, refer to the instruction manual for the camera control unit.
A Using the buttons on the camera
1 Displays the main menu.
Press and hold down the SET
button for 3 seconds or longer to
display the main menu.
2 Moves the cursor during menu
setting operations.
3 Switches the menu screen.
4 Performs focusing or zooming
in/out operations.
While the auto-focus function is
activated, you can perform
focusing operations using the
buttons.
j: NEAR l: FAR
d: WIDE c: TELE
B Using the VAC-70 camera control unit (optionally available) to perform
the settings remotely
• Be sure to disconnect the camera control unit after you complete setting up the camera.
• Avoid connecting the camera control unit via a cable compensator or video distribution
amplifier.
Doing so may prevent remote control of your camera.
Video in
VIDEO OUT
CAMERA
BNC type
2
4
VAC-70
1
11
1
3
2
4
3