System | Maint. Window - Raychem nvent NGC-UIT3-EX Programming Manual

• Level 2 - Allows access to System | Maintenance window, which permits clearing of Events and program exit.
- The default password is 1234.
IMPORTANT: Change the Level 2 password after commissioning.
Old Password Entry Field
1234
New Password Entry Field
Enter your user-defined Level 2 password.
Save new Password Action Button
Confirms password has been saved.
IMPORTANT: Save and protect the Level 2 password in a secure location. Contact a nVent representative for lost password
recovery.
3.3.36 System | Maint. window
(Level 2 Password Required) This window allows for clearing the Events List and to exit the program.
Fig. 3.49 System | Maint window
The System | Maint. window provides the following controls:
• Clear Events List Action Button - Clears all Events and Alarms history
IMPORTANT: By clearing the event, all the Events and Alarms history information for all Circuits is lost. If the program exit is
chosen, heaters are no longer monitored.
RAYCHEM-OM-EU2032-NGCUIT3EX-EN-2203
|
nVent.com/RAYCHEM 59