Status | Safety Limiter Window (Elexant 5010I And Ngc-20); Status | Min / Max Window - Raychem nvent NGC-UIT3-EX Programming Manual

3.3.20 Status | Safety Limiter window (Elexant 5010i and NGC-20)
The Status|Safety Limiter window displays the current Safety Limiter's temperature and a historical record of minimum and maximum
values recorded since the last Reset time. Data in this status window is "read only" information. Pressing reset releases all min./max.
values and starts another period of accumulation for minimum and maximum values.
Fig. 3.29 Status | Safety Limiter window
The Status|Safety Limiter window provides the following controls:
• Safety Limiter Temp Field - Displays the last reported temperature from the Safety Limiter's RTD
• Safety Limiter Setpoint Field - The temperature that the controller is using for the Safety Limiter alarm
• Reset Safety Limiter Action Button - In normal state, the Reset Safety Limiter button in grayed out. If a latching alarm occurs, the
Reset Safety Limiter button blinks orange/red. The alarm cannot be reset until the Safety Limiter's temperature is below the Safety
Limiter's Setpoint.
• Safety Limiter Min Temp - The lowest temperature reported by the Safety Limiter's RTD since the last reset time
• Safety Limiter Max Temp - The highest temperature reported by the Safety Limiter's RTD since the last reset time
3.3.21 Status | Min / Max Window
This window displays an historical record of minimum and maximum values recorded since the last Reset time. Data in this status
window is "read-only" information. Pressing reset releases all values and starts another period of accumulation for minimum or
maximum values.
Fig. 3.31 Status | Min/Max window
|
44 nVent.com/RAYCHEM
RAYCHEM-OM-EU2032-NGCUIT3EX-EN-2203