Setting Up Additional Circuits; Circuits 1-4 Setup Complete Confirmation - Raychem nvent NGC-UIT3-EX Programming Manual

Fig. 2.18 Circuit 1 disabled
At the Main status display with Circuit #1 disabled:
• On the Main menu window, any Disabled Circuit is grayed out as above
2.2 Setting Up Additional Circuits
Follow Steps 4 through 10 above to set-up each additional Circuit.
2.3 Circuits 1–4 Setup Complete Confirmation
After completing the Setup for Circuits 1, 2, 3, and 4, and Circuits are Enabled, go to the Main window to confirm all Circuits are
activated and working properly.
Fig. 2.19 Main status window for confirmation
|
nVent.com/RAYCHEM 19
RAYCHEM-OM-EU2032-NGCUIT3EX-EN-2203