E&G Classics Denali 1094-0185-15 Instruction Manual

IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE !
Copyright © 2014 by E&G Corporation, LLC. All right reserved. The reproduction or utilization of this work in any form or any electronic, mechanical, or other means, no known or hereafter invented,
including xerography, photocopying, and recording, and in any information storage retrieval system is forbidden without written permission of owners.
TOOLS REQUIRED
E&G is proud to present this package to you and reminds you that for technical information, contact technical as-
sistance at 410-381-4900. Do not attempt the installation of any E&G product without first reading the detailed in-
structions. E&G Classics will not warrant damaged parts or the vehicle due to altered installation procedures.
1. Apply masking tape to the factory chrome surround, factory
emblem and to the top of the bumper cover as shown. Remove
the radiator support panel cover and the six (6) 10mm hex bolts
securing the outer edges of the bumper cover and the top of
the grille.
3
3. Once the factory chrome sections have been removed, align the
E&G grille into place, making sure all studs pass through the
existing openings in the factory grille.
Copyright 2014 by E&G Corporation, LLC.
2015 GMC Yukon
Upper "Denali" Style Grille
Automotive grade masking tape, flat blade screwdriver, 10mm & 9mm socket and ratchet, solvent, glass
cleaner and soft, clean cloths.
Notes to the Technician/Installer:
1
Part #:1094-0185-15
2. Use a flat blade screwdriver to pry out the factory chrome trim
sections from around the grille openings.
4
4. Carefully pull out on the factory grille and install the supplied
mounting brackets and #8-32 ESNA half nuts onto all six (6)
upper mounting studs and tighten until the nylon portion of the
lock nut engages the stud threads.
2
Visit us online today at www.egclassics.com
07/30/2014