Table of Contents
Advertisement
MENU
PIN Key In Operation
When the projector is turned on and the
PIN LOCK PROTECTION is set to [ON],
the image will show as on the right side.
1. Press the MENU button on the projector
or remote control. Enter PIN code by
keypad or remote control.
2. How to enter a PIN code?
You can use control panel or remote
control.
CONTROL PANEL
KEYSTONE
VOL -
VOL+
INPUT
MENU
(1) Press ◄ button: Select the [ 1 ]
(2) Press ▲ button: Select the [ 2 ]
(3) Press ► button: Select the [ 3 ]
(4) Press ▼ button: Select the [ Enter ] move to next row.(4~6,7~9,
(5) Press
(backspace) item:
In case you enter a wrong digit, select
(6) Press
(backspace) item:
Once all four digits of the PIN are entered, select
NOTE
If the PIN is incorrect, a ' Enter new code " message will be shown. Please try again. If the PIN
code input is incorrect for three times, a warning message will show up and the projector will
shut itself down in 30 seconds.
If you have no idea about the PIN, please contact your dealer for help.
ViewSonic
REMOTE CONTROL
MENU
The control panel and remote control buttons to enter a sequence
of PIN code is like the photo below.
to delete the wrong digit you entered.
to confirm.
3
~OK)
PJL7200/PJL7201/PJL7202
Advertisement
Table of Contents
