Table of Contents
Advertisement
1 Introduction
Command sequence
Config level -> Power controller -> Operating mode
Small arrows between words are designed to make it easier to find parameters in the configuration level.
DISPOSAL!
At the end of its service life, the device and any batteries present do not belong in the trash! Please en-
sure that they are disposed of properly and in an environmentally friendly manner.
1.3
Display types
Hexadecimal number
0x0010
A hexadecimal number is identified by a "0x" prefix (in this case 16 decimal).
1.4
Available interfaces
The setup interface on the front (USB connector type B Micro 5-pole) is provided in every device.
An RS422/RS485 interface (4-pole screwed connector) must be stated in the order.
This operating manual only describes communication via the RS422/485 interface using the Modbus
protocol.
1.5
Identifying the device version
Only devices with a 54 in the order code (5) are equipped with the RS422/485 interface.
On the device
1. Press PGM.
2. Select the "Device info" menu item and press PGM.
6
Advertisement
Table of Contents
