Advertisement
XC-1 Hardware Manual (1.3.2)
7 Speaker [G]
The XC-1 has a speaker. The layout of the speaker is shown below.
Audio signals are generated by filtering pulse width modulated (PWM) digital signals
to form an analogue waveform, which is amplified and sent to the speaker, as shown
below
The speaker pin is mapped to a port on processor 0, as shown in the table below.
Downloaded from
Elcodis.com
electronic components distributor
X0D34
FILTER
Pin
Port
1b
X0D34 P1K0 PORT_SPEAKER
www.xmos.com
AMPLIFIER
SPEAKER
Processor
0
12/17
Advertisement
