Scs1 Header (P9); Scs10 Header (P10) - Motorola HC05F6 User Manual

3.1.3

SCS1 Header (P9)

3.1.4 SCS0 Header (P10)
HC05F6EM USER'S MANUAL
Jumper header P9 lets the user to define the default reset value of SCS1.
(bit 7 in the system option register $002C.) The diagram below shows
the factory configuration: the fabricated jumper between pins 1 and 2
sets the default reset value of SCS1 to '0'.
Alternatively, the default reset value of SCS1 is set to '1' by removing
the fabricated jumper between pins 1 and 2.
FABRICATED
JUMPER
Jumper header P10 lets the user to define the default reset value of
SCS0. (bit 6 in the system option register $002C.) The diagram below
shows the factory configuration: the fabricated jumper between pins 1
and 2 sets the default reset value of SCS0 to '0'.
Alternatively, the default reset value of SCS0 is set to '1' by removing
the fabricated jumper between pins 1 and 2.
FABRICATED
JUMPER
P9
1
SCS1
2
P10
1
SCS0
2
3
MOTOROLA
3-3