H3C WX Series Getting Started Manual page 14

Field
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
user-group system
local-user admin
password simple admin
authorization-attribute level 3
service-type telnet
wlan rrm
dot11a mandatory-rate 6 12 24
dot11a supported-rate 9 18 36 48 54
dot11b mandatory-rate 1 2
dot11b supported-rate 5.5 11
dot11g mandatory-rate 1 2 5.5 11
dot11g supported-rate 6 9 12 18 24 36 48
54
interface NULL0
interface Vlan-interface1
ip address 192.168.0.100 255.255.255.0
Description
Basic configurations in the default domain
system:
The number of associated clients is not limited.
Specify the current domain to be in the active
state.
Disable the idle-cut function for the current ISP
domain.
Disable the location function of the
self-service server.
system is the default user group. You cannot
delete the default user group but you can
modify its configuration.
The default configuration of the local user is as
follows:
The username is admin.
The password is admin, case sensitive.
The user level is 3 (manage level).
The service type is telnet.
The default 802.11a/b/g settings are as shown
on the left column.
The default rates depend on your AC model.
The interface type supported by the AC.
By default, the default IP address of
VLAN-interface 1 is 192.168.0.100, and the
subnet mask is 255.255.255.0.
14