H3C WX Series Getting Started Manual page 13

dot11b supported-rate 5.5 11
dot11g mandatory-rate 1 2 5.5 11
dot11g supported-rate 6 9 12 18 24 36 48 54
#
interface NULL0
#
interface Vlan-interface1
ip address 192.168.0.100 255.255.255.0
#
interface GigabitEthernet1/0/1
#
interface GigabitEthernet1/0/2
#
interface GigabitEthernet1/0/3
#
interface GigabitEthernet1/0/4
#
interface Ten-GigabitEthernet1/0/5
#
load xml-configuration
#
user-interface con 0
user-interface vty 0 4
authentication-mode scheme
user privilege level 3
#
return
Table 2 Description of the default configuration
Field
version 5.20, Release 2106P01
sysname H3C
undo info-center logfile enable
domain default enable system
telnet server enable
port-security enable
vlan 1
Description
The AC software version currently in use
The default sysname is H3C.
Disable the logfile function.
The default enabled domain is system.
By default, telnet server is enabled.
By default, port security is enabled.
VLAN 1 is the default VLAN, and you cannot
create and delete a default VLAN.
13