Table of Contents
Advertisement
Superabrasive
3. HANDLING AND TRANSPORTATION
SPLITTING THE CARRIAGE FROM THE MAINHEAD
Figure 3.1
Unplug the motor cable plug from the control box and disconnect the water hose from the main head by pulling it out (Fig.3.1)
(Fig.3.2). Wind the electrical cable on the carriage. Release the pin sets attaching the head to the carriage (Fig.3.4). Pull out the
vacuum hoses (Fig.3.3), and dismount the head from the carriage (Fig.3.5).
The head of the LAVINA® X machine has one bar for support, which can be used as a handle for easier transportation.
LIFT THE MACHINE FROM WORKING TO TOOL MOUNTING POSITION
Push the lock the handle down and swivel it to the front (Fig.3.6.1). Pull
the handle up and ensure the head is a stable upright position for
mounting/dismounting the tool. Ensure that the water tank is empty before
flipping the machine. Pull the head in upright position (Fig.3.6.2).
LIFTING
Lifting the machine by crane is possible with the eye bolt, which is mounted
Figure 3.7
ADJUSTING THE HANDLE
The Handle on the frame is adjustable in height and allows
the operator to work in a correct and safe posture. To adjust,
simply pull the locking pin (Fig.3.8.1) and move the frame. A
loaded spring will return the pin and lock the handle in any
of several positions (Fig.3.8.2). Choose the vertical position
to easily move the machine.
User Manual
Figure 3.2
Figure 3.4
on the carriage (see Fig. 3.7). The eye bolt and
machine construction is rated only for the
weight of the machine. Do not lift any other
machine. Always use hoisting
Original Language
Figure 3.5
Figure 3.6.1
Figure 3.6.1
equipment
rated for 300 kg (660 lbs) or greater.
Figure 3.8.1
8
Lavina® 25-X
9/2018
Figure 3.3
Figure 3.6.2
loads on the
Figure 3.6.2
Figure 3.8.2
Advertisement
Table of Contents
