Tools And Accessories; Weights; Tool Holder Key; Foam Plate - lavina 25-X User Manual

Superabrasive

5. TOOLS AND ACCESSORIES

Figure 5.1
Figure 5.3
Figure 5.4
Figure 5.5
User Manual

WEIGHTS

Superabrasive offers additional weights used to increase the productivity of the machine (Fig.5.1).
Each additional weight weighs about 64 lbs or 29kg. Each individual application, type and condition
of surface, power capacity of the outlet, etc. will determine the number of weights you can use
without tripping a breaker. The weights stack onto three posts fixed around the outer bowl
(Fig.5.2). Additional weights will largely depend on the tools; it is not always possible to add
weights. Some tools work too aggressively and will cause the machine to stop. The weight can be
ordered with item number A08.00.00.00
Figure 5.2

TOOL HOLDER KEY

The tool holder key (Fig.5.3) is used for adjusting, mounting and dismounting of the foam plates. Always
use the key to properly secure foam plates.
Item number is A03.00.00.00

FOAM PLATE

Diamond tools with Velcro are mounted on the foam plate 9"(Fig.5.4). The foam plate is mounted on the
"QuickChange" System.
Item number is LV‐9‐FP‐S

SECURITY PLATE FOR QUICKCHANGE PADS

Plate (Fig.5.5) used to secure the "QuickChange" pads.
Item number is A38.00.01
WARNING: Always Secure the Quick Change tools with the security ring, lock the security plate with
the tool holder key (Fig.5.3) and make sure that the butterfly is securely locked at 90 degrees.
Original Language
11
Lavina® 25-X 9/2018