Touch Screen; Brightness Button; Calibration; Basic Navigation - Fluke 1734 User Manual

1732/1734
Users Manual

Touch Screen

The touch screen lets you interact directly with what is on the display.
To change parameters, touch a target on the display. Touch targets
are easy to recognize, such as large buttons, items in menus, or keys
of the virtual keyboard. The Product can be operated with insulating
gloves on (resistive touch).

Brightness Button

The touch screen has a backlight for work in dimly lit spaces. See
Table 4 for the location of the Brightness (
adjust the brightness in two levels and to turn on and turn off the
display.
The brightness is set to 100 % when the Logger is powered from
mains. When powered from battery, the default brightness is set to the
power-save level of 30 %. Push
brightness levels.
Push and hold  for 3 seconds to turn off the display. Push
on the display.
18
 ) button. Push  to
 to toggle between the two


Calibration

The touch screen is pre-calibrated in the factory. If you notice that the
targets do not align with your touch on the display, you can calibrate
the display. Calibration of the touch screen is available in the
menu. See Touch Screen Calibration on page 43 for more information.

Basic Navigation

When an option menu shows on the display, use
within the menu.
The  button has a dual use. In the Configuration and Setup
screens, push 
for 2 seconds to take a screen shot. A beep and the camera symbol
on the display confirm the action. See Screen Capture on page 39 for
more information about how to review, manage, and copy the screen
shots.
Along the bottom of the display, a row of labels shows the available
functions. Push
to turn
to start that function. These labels also work as touch targets.
to confirm the selection. On all screens, push
 
or

 /  to move

below the display label